Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small frameless orange fan with eleven blades on a compact black frame

OEM Industries

OEM Industries PLD06010B12HH 55mm 12V .4A 4 Pin 11 orange blades CPU cooler

SKU CH-BEFP-HJD4N

Compact frameless fan with 11 orange blades, 12 V 0.4 A four-pin power and ball bearing for graphics card cooling

  • ColorOrange
  • TypeFan only
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • 55 mm frameless design fits tight VGA spaces
  • 11 orange blades move air through compact heatsinks
  • 12 V 0.4 A four-pin PWM connector enables speed control
  • Ball bearing construction extends operating life
  • 32×39×43 mm footprint suits small-form-factor builds

Compact Frameless Cooler

The OEM Industries PLD06010B12HH is a frameless 55 mm cooling fan designed for graphics cards and similar small-form-factor applications. It operates on a 12 V supply drawing 0.4 A through a standard 4-pin connector. Eleven orange blades move air through the open frame, while a ball bearing supports continuous rotation. The unit ships new and ready for direct mounting.

4-Pin PWM Connector

The single specification that decides fit is the 4-pin power connector, which carries a PWM control signal alongside the 12 V supply. A 3-pin header will power the fan but cannot regulate its speed automatically. Builders using motherboard or GPU headers without PWM support lose variable-speed operation. Verify the header pin count before installation.

Low-Profile Airflow

At 32 x 39 x 43 mm the cooler suits tight clearances around voltage-regulator modules or memory chips on a graphics card. The frameless design allows screw mounting directly to a heatsink or shroud where a housed fan would not fit. It handles spot cooling for mid-range GPUs but runs out of static pressure for dense high-wattage heatsinks. Buyers needing higher CFM or ducted airflow should look elsewhere.

Priekšrocības

  • 55 mm frameless design fits tight VGA spaces
  • 11 orange blades move air through compact heatsinks
  • 12 V 0.4 A four-pin PWM connector enables speed control
  • Ball bearing construction extends operating life
  • 32×39×43 mm footprint suits small-form-factor builds

Specifikācijas

ModelPLD06010B12HH
ColorOrange
TypeFan only
Bearing TypeBall
Power Connector4 Pin
LEDNo

Jautājumi par šo preci

What does the 12V 0.4A rating mean for daily operation?

It draws 0.4 amps from a 12 volt header, so a standard motherboard fan connector can supply enough current without an external power adapter.

What does the 4-pin connector control on this cooler?

The fourth wire carries a PWM signal that lets the motherboard vary the fan speed dynamically instead of running at a fixed voltage.

Will the 55mm frame with 32 by 39 by 43mm dimensions fit my graphics card shroud?

The frameless design measures 32mm thick, 39mm wide and 43mm high; compare those clearances against your card's mounting holes and heatsink height before installing.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.