Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small frameless orange fan with eleven blades on a compact black frame

OEM Industries

OEM Industries PLD06010B12HH 55mm 12V .4A 4 Pin 11 orange blades CPU cooler

SKU CH-BEFP-HJD4N

Compact frameless fan with 11 orange blades, 12 V 0.4 A four-pin power and ball bearing for graphics card cooling

  • ColorOrange
  • TypeFan only
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • 55 mm frameless design fits tight VGA spaces
  • 11 orange blades move air through compact heatsinks
  • 12 V 0.4 A four-pin PWM connector enables speed control
  • Ball bearing construction extends operating life
  • 32×39×43 mm footprint suits small-form-factor builds

Compact Frameless Cooler

The OEM Industries PLD06010B12HH is a frameless 55 mm cooling fan designed for graphics cards and similar small-form-factor applications. It operates on a 12 V supply drawing 0.4 A through a standard 4-pin connector. Eleven orange blades move air through the open frame, while a ball bearing supports continuous rotation. The unit ships new and ready for direct mounting.

4-Pin PWM Connector

The single specification that decides fit is the 4-pin power connector, which carries a PWM control signal alongside the 12 V supply. A 3-pin header will power the fan but cannot regulate its speed automatically. Builders using motherboard or GPU headers without PWM support lose variable-speed operation. Verify the header pin count before installation.

Low-Profile Airflow

At 32 x 39 x 43 mm the cooler suits tight clearances around voltage-regulator modules or memory chips on a graphics card. The frameless design allows screw mounting directly to a heatsink or shroud where a housed fan would not fit. It handles spot cooling for mid-range GPUs but runs out of static pressure for dense high-wattage heatsinks. Buyers needing higher CFM or ducted airflow should look elsewhere.

Kohokohdat

  • 55 mm frameless design fits tight VGA spaces
  • 11 orange blades move air through compact heatsinks
  • 12 V 0.4 A four-pin PWM connector enables speed control
  • Ball bearing construction extends operating life
  • 32×39×43 mm footprint suits small-form-factor builds

Tekniset tiedot

ModelPLD06010B12HH
ColorOrange
TypeFan only
Bearing TypeBall
Power Connector4 Pin
LEDNo

Kysymyksiä tästä tuotteesta

What does the 12V 0.4A rating mean for daily operation?

It draws 0.4 amps from a 12 volt header, so a standard motherboard fan connector can supply enough current without an external power adapter.

What does the 4-pin connector control on this cooler?

The fourth wire carries a PWM signal that lets the motherboard vary the fan speed dynamically instead of running at a fixed voltage.

Will the 55mm frame with 32 by 39 by 43mm dimensions fit my graphics card shroud?

The frameless design measures 32mm thick, 39mm wide and 43mm high; compare those clearances against your card's mounting holes and heatsink height before installing.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.