Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small frameless orange fan with eleven blades on a compact black frame

OEM Industries

OEM Industries PLD06010B12HH 55mm 12V .4A 4 Pin 11 orange blades CPU cooler

SKU CH-BEFP-HJD4N

Compact frameless fan with 11 orange blades, 12 V 0.4 A four-pin power and ball bearing for graphics card cooling

  • ColorOrange
  • TypeFan only
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • 55 mm frameless design fits tight VGA spaces
  • 11 orange blades move air through compact heatsinks
  • 12 V 0.4 A four-pin PWM connector enables speed control
  • Ball bearing construction extends operating life
  • 32×39×43 mm footprint suits small-form-factor builds

Compact Frameless Cooler

The OEM Industries PLD06010B12HH is a frameless 55 mm cooling fan designed for graphics cards and similar small-form-factor applications. It operates on a 12 V supply drawing 0.4 A through a standard 4-pin connector. Eleven orange blades move air through the open frame, while a ball bearing supports continuous rotation. The unit ships new and ready for direct mounting.

4-Pin PWM Connector

The single specification that decides fit is the 4-pin power connector, which carries a PWM control signal alongside the 12 V supply. A 3-pin header will power the fan but cannot regulate its speed automatically. Builders using motherboard or GPU headers without PWM support lose variable-speed operation. Verify the header pin count before installation.

Low-Profile Airflow

At 32 x 39 x 43 mm the cooler suits tight clearances around voltage-regulator modules or memory chips on a graphics card. The frameless design allows screw mounting directly to a heatsink or shroud where a housed fan would not fit. It handles spot cooling for mid-range GPUs but runs out of static pressure for dense high-wattage heatsinks. Buyers needing higher CFM or ducted airflow should look elsewhere.

Přednosti

  • 55 mm frameless design fits tight VGA spaces
  • 11 orange blades move air through compact heatsinks
  • 12 V 0.4 A four-pin PWM connector enables speed control
  • Ball bearing construction extends operating life
  • 32×39×43 mm footprint suits small-form-factor builds

Specifikace

ModelPLD06010B12HH
ColorOrange
TypeFan only
Bearing TypeBall
Power Connector4 Pin
LEDNo

Otázky k tomuto produktu

What does the 12V 0.4A rating mean for daily operation?

It draws 0.4 amps from a 12 volt header, so a standard motherboard fan connector can supply enough current without an external power adapter.

What does the 4-pin connector control on this cooler?

The fourth wire carries a PWM signal that lets the motherboard vary the fan speed dynamically instead of running at a fixed voltage.

Will the 55mm frame with 32 by 39 by 43mm dimensions fit my graphics card shroud?

The frameless design measures 32mm thick, 39mm wide and 43mm high; compare those clearances against your card's mounting holes and heatsink height before installing.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.