OEM Industries
OEM Industries PUDC12D3RS-065 80mm 12V 0.05A 3-Pin CPU Cooler
An 80 mm square fan with ball bearing, 12 V 0.05 A draw and a 3-pin connector for server CPU cooling
- ColorBlack
- TypeFan only
- Fan Size80mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- Low 0.6 W draw keeps system power minimal
- 12 V 0.05 A design fits standard 3-pin headers
- 80 mm square frame suits compact server chassis
- Ball bearing motor provides durable continuous operation
- 3-wire tachometer signal enables speed monitoring
OEM Industries 80 mm CPU Fan
This 80 mm square fan from OEM Industries mounts directly onto a CPU heatsink or case panel. It runs on 12 V power through a standard three-pin connector. Ball bearings support the rotating assembly. No lighting is included.
Builders needing a basic 12 V 3-pin cooler
The unit suits servers or workstations that accept an 80 mm fan with a three-pin header. It does not serve systems that require PWM speed control or a four-pin connector. Buyers who want adjustable fan curves should look at something else.
Three-pin 12 V power connector
The cooler draws 0.05 A at 12 V for a rated 0.6 W. The three-pin interface supplies power and a tachometer signal but no PWM line. Verify that your motherboard or fan controller provides a matching three-pin header before purchasing.
Priekšrocības
- Low 0.6 W draw keeps system power minimal
- 12 V 0.05 A design fits standard 3-pin headers
- 80 mm square frame suits compact server chassis
- Ball bearing motor provides durable continuous operation
- 3-wire tachometer signal enables speed monitoring
Specifikācijas
| Model | PUDC12D3RS-065 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 80mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
Jautājumi par šo preci
How much noise and heat does the 80 mm ball-bearing fan add when it runs continuously at 12 V?
The fan draws 0.05 A at 12 V, consuming 0.6 W, so its thermal contribution is minimal and ball bearings typically run quietly at this low power level.
What power connector must the motherboard or fan controller provide for the 3-pin plug?
A standard 3-pin 12 V fan header is required; the cooler has no other cables or adapters included.
Will the 80 mm square frame align with the mounting holes on an older 80 mm chassis fan bracket?
The fan measures 80 mm by 25 mm thick, matching the common 8025 form factor used in many legacy server and desktop brackets.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.0000105BTC
Krājumā