Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 80mm square case fan with 3-pin connector

OEM Industries

OEM Industries PUDC12D3RS-065 80mm 12V 0.05A 3-Pin CPU Cooler

SKU CH-1YYQ-JESAE

An 80 mm square fan with ball bearing, 12 V 0.05 A draw and a 3-pin connector for server CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Low 0.6 W draw keeps system power minimal
  • 12 V 0.05 A design fits standard 3-pin headers
  • 80 mm square frame suits compact server chassis
  • Ball bearing motor provides durable continuous operation
  • 3-wire tachometer signal enables speed monitoring

OEM Industries 80 mm CPU Fan

This 80 mm square fan from OEM Industries mounts directly onto a CPU heatsink or case panel. It runs on 12 V power through a standard three-pin connector. Ball bearings support the rotating assembly. No lighting is included.

Builders needing a basic 12 V 3-pin cooler

The unit suits servers or workstations that accept an 80 mm fan with a three-pin header. It does not serve systems that require PWM speed control or a four-pin connector. Buyers who want adjustable fan curves should look at something else.

Three-pin 12 V power connector

The cooler draws 0.05 A at 12 V for a rated 0.6 W. The three-pin interface supplies power and a tachometer signal but no PWM line. Verify that your motherboard or fan controller provides a matching three-pin header before purchasing.

Puncte forte

  • Low 0.6 W draw keeps system power minimal
  • 12 V 0.05 A design fits standard 3-pin headers
  • 80 mm square frame suits compact server chassis
  • Ball bearing motor provides durable continuous operation
  • 3-wire tachometer signal enables speed monitoring

Specificații

ModelPUDC12D3RS-065
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Întrebări despre acest articol

How much noise and heat does the 80 mm ball-bearing fan add when it runs continuously at 12 V?

The fan draws 0.05 A at 12 V, consuming 0.6 W, so its thermal contribution is minimal and ball bearings typically run quietly at this low power level.

What power connector must the motherboard or fan controller provide for the 3-pin plug?

A standard 3-pin 12 V fan header is required; the cooler has no other cables or adapters included.

Will the 80 mm square frame align with the mounting holes on an older 80 mm chassis fan bracket?

The fan measures 80 mm by 25 mm thick, matching the common 8025 form factor used in many legacy server and desktop brackets.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.