Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 80mm square case fan with 3-pin connector

OEM Industries

OEM Industries PUDC12D3RS-065 80mm 12V 0.05A 3-Pin CPU Cooler

SKU CH-1YYQ-JESAE

An 80 mm square fan with ball bearing, 12 V 0.05 A draw and a 3-pin connector for server CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Low 0.6 W draw keeps system power minimal
  • 12 V 0.05 A design fits standard 3-pin headers
  • 80 mm square frame suits compact server chassis
  • Ball bearing motor provides durable continuous operation
  • 3-wire tachometer signal enables speed monitoring

OEM Industries 80 mm CPU Fan

This 80 mm square fan from OEM Industries mounts directly onto a CPU heatsink or case panel. It runs on 12 V power through a standard three-pin connector. Ball bearings support the rotating assembly. No lighting is included.

Builders needing a basic 12 V 3-pin cooler

The unit suits servers or workstations that accept an 80 mm fan with a three-pin header. It does not serve systems that require PWM speed control or a four-pin connector. Buyers who want adjustable fan curves should look at something else.

Three-pin 12 V power connector

The cooler draws 0.05 A at 12 V for a rated 0.6 W. The three-pin interface supplies power and a tachometer signal but no PWM line. Verify that your motherboard or fan controller provides a matching three-pin header before purchasing.

Přednosti

  • Low 0.6 W draw keeps system power minimal
  • 12 V 0.05 A design fits standard 3-pin headers
  • 80 mm square frame suits compact server chassis
  • Ball bearing motor provides durable continuous operation
  • 3-wire tachometer signal enables speed monitoring

Specifikace

ModelPUDC12D3RS-065
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Otázky k tomuto produktu

How much noise and heat does the 80 mm ball-bearing fan add when it runs continuously at 12 V?

The fan draws 0.05 A at 12 V, consuming 0.6 W, so its thermal contribution is minimal and ball bearings typically run quietly at this low power level.

What power connector must the motherboard or fan controller provide for the 3-pin plug?

A standard 3-pin 12 V fan header is required; the cooler has no other cables or adapters included.

Will the 80 mm square frame align with the mounting holes on an older 80 mm chassis fan bracket?

The fan measures 80 mm by 25 mm thick, matching the common 8025 form factor used in many legacy server and desktop brackets.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.