Orico M.2 SATA SSD Enclosure USB 3.2 Gen2 6Gbps Type-C 4TB Tool-Free
- Gray
- Enclosure
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Orico
Holds one M.2 SATA SSD up to 4 TB, connects via USB 3.1 Type-C at 10 Gbps, and includes an aluminium cooling vest plus a C-to-C/A cable
HDD Count Supported Single SSD
Number of Bay 1 Bay
Size M.2 NVME SSD
Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.
This aluminium enclosure houses one M.2 SATA SSD up to 4 TB and connects through a USB 3.1 Gen 2 Type-C port rated at 10 Gbps. A combined C-to-C and C-to-A cable is included for direct attachment to laptops, desktops or phones that support USB OTG. The tool-free design lets you swap drives without screws or trays. A full-length cooling vest wraps the drive to dissipate heat during sustained transfers.
Builders who need an NVMe or PCIe enclosure should look elsewhere because this model only accepts SATA protocol drives. It also supports a single drive, so anyone planning a multi-bay RAID array will need a different chassis. The 10 Gbps interface is limited by the SATA device itself, so peak throughput will not reach the port’s theoretical maximum.
The external connection uses USB 3.2 Gen 2 signalling at 10 Gbps over a Type-C plug, with the supplied 2-in-1 cable also delivering up to 60 W Power Delivery for host charging. This single specification determines whether your host port can drive the enclosure at full speed while simultaneously powering a connected laptop or tablet.
| Brand | ORICO |
|---|---|
| Color | Gray |
| Type | Enclosure |
| Material | Aluminum |
| External Interface | USB 3.1 Type-C |
| HDD Count Supported | Single SSD |
| Number of Bay | 1 Bay |
| Maximum Capacity (per Bay) | Up to 4TB |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Connect the enclosure to a USB 3.2 Gen 2 port using the supplied C-to-C/A cable, then run a benchmark tool such as CrystalDiskMark; sustained sequential reads approaching the drive's rated limit confirm the 10 Gbps link is active.
The package includes the aluminium enclosure with its built-in cooling vest, a tool-free drive tray, and a 2-in-1 USB-C to USB-C / USB-A cable; you must provide your own M.2 SATA SSD up to 4 TB.
Any M.2 SATA SSD up to 4 TB is supported; pick a capacity that matches your storage budget and workload — common choices are 500 GB, 1 TB, 2 TB or 4 TB.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?