Orico M.2 SATA SSD Enclosure USB 3.2 Gen2 6Gbps Type-C 4TB Tool-Free
- Gray
- Enclosure
Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.
Orico
Holds one M.2 SATA SSD up to 4 TB, connects via USB 3.1 Type-C at 10 Gbps, and includes an aluminium cooling vest plus a C-to-C/A cable
HDD Count Supported Single SSD
Number of Bay 1 Bay
Size M.2 NVME SSD
De overstregede versioner findes, men er ikke på lager her.
This aluminium enclosure houses one M.2 SATA SSD up to 4 TB and connects through a USB 3.1 Gen 2 Type-C port rated at 10 Gbps. A combined C-to-C and C-to-A cable is included for direct attachment to laptops, desktops or phones that support USB OTG. The tool-free design lets you swap drives without screws or trays. A full-length cooling vest wraps the drive to dissipate heat during sustained transfers.
Builders who need an NVMe or PCIe enclosure should look elsewhere because this model only accepts SATA protocol drives. It also supports a single drive, so anyone planning a multi-bay RAID array will need a different chassis. The 10 Gbps interface is limited by the SATA device itself, so peak throughput will not reach the port’s theoretical maximum.
The external connection uses USB 3.2 Gen 2 signalling at 10 Gbps over a Type-C plug, with the supplied 2-in-1 cable also delivering up to 60 W Power Delivery for host charging. This single specification determines whether your host port can drive the enclosure at full speed while simultaneously powering a connected laptop or tablet.
| Brand | ORICO |
|---|---|
| Color | Gray |
| Type | Enclosure |
| Material | Aluminum |
| External Interface | USB 3.1 Type-C |
| HDD Count Supported | Single SSD |
| Number of Bay | 1 Bay |
| Maximum Capacity (per Bay) | Up to 4TB |
Andre versioner af denne model
Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.
Connect the enclosure to a USB 3.2 Gen 2 port using the supplied C-to-C/A cable, then run a benchmark tool such as CrystalDiskMark; sustained sequential reads approaching the drive's rated limit confirm the 10 Gbps link is active.
The package includes the aluminium enclosure with its built-in cooling vest, a tool-free drive tray, and a 2-in-1 USB-C to USB-C / USB-A cable; you must provide your own M.2 SATA SSD up to 4 TB.
Any M.2 SATA SSD up to 4 TB is supported; pick a capacity that matches your storage budget and workload — common choices are 500 GB, 1 TB, 2 TB or 4 TB.
Også på denne hylde
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Det du betaler med, og det du ser priserne i.
Sendes fra din tegnebog i kassen
Kun til visning — kataloget er prissat i USD
Ingen valuta matcher det.
Vælg det sprog, siden taler til dig på.
Ingen sprog matcher.
Ny her?
Har du allerede en?
Der findes ingen automatisk nulstilling: denne butik sender ingen e-mails, så der er intet engangslink at bede om. Efterlad adressen på kontoen, så bliver den behandlet manuelt.
Anmodning registreret
Der er intet på vej til din indbakke — denne butik sender slet ingen e-mails. Nogen behandler dem manuelt.
Kom du i tanke om den?