Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Grey aluminium M.2 SATA enclosure with cooling vest and USB-C cable

Orico

Orico M.2 SATA drive enclosure USB 3.1 Type-C 10Gbps up to 4TB aluminium cooling vest C to C/A cable

SKU CH-M7E7-FJCRY MPN M.2

Holds one M.2 SATA SSD up to 4 TB, connects via USB 3.1 Type-C at 10 Gbps, and includes an aluminium cooling vest plus a C-to-C/A cable

  • ColorGray
  • TypeEnclosure
  • MaterialAluminum
  • External InterfaceUSB 3.1 Type-C
  • HDD Count SupportedSingle SSD
  • Number of Bay1 Bay

HDD Count Supported Single SSD

Number of Bay 1 Bay

Size M.2 NVME SSD

  • M.2 NGFF SSD
  • M.2 NVMe / NGFF SSD
  • M.2 NVMe 40Gbps
  • M.2 NVME SSD

Model With Cover

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Tool-free installation lets you swap drives in seconds
  • Cooling vest design extends SSD lifespan by lowering temperatures
  • USB 3.2 Gen 2 10Gbps interface delivers rapid file transfers
  • Supports up to 4TB SATA M.2 drives for massive storage
  • C-to-C/A 2-in-1 cable with 60W PD works across laptops and phones

Single-bay SATA enclosure with USB 3.1 Type-C

This aluminium enclosure houses one M.2 SATA SSD up to 4 TB and connects through a USB 3.1 Gen 2 Type-C port rated at 10 Gbps. A combined C-to-C and C-to-A cable is included for direct attachment to laptops, desktops or phones that support USB OTG. The tool-free design lets you swap drives without screws or trays. A full-length cooling vest wraps the drive to dissipate heat during sustained transfers.

Suits users adding portable SATA storage to USB-C

Builders who need an NVMe or PCIe enclosure should look elsewhere because this model only accepts SATA protocol drives. It also supports a single drive, so anyone planning a multi-bay RAID array will need a different chassis. The 10 Gbps interface is limited by the SATA device itself, so peak throughput will not reach the port’s theoretical maximum.

USB 3.1 Gen 2 10 Gbps Type-C interface

The external connection uses USB 3.2 Gen 2 signalling at 10 Gbps over a Type-C plug, with the supplied 2-in-1 cable also delivering up to 60 W Power Delivery for host charging. This single specification determines whether your host port can drive the enclosure at full speed while simultaneously powering a connected laptop or tablet.

Kohokohdat

  • Tool-free installation lets you swap drives in seconds
  • Cooling vest design extends SSD lifespan by lowering temperatures
  • USB 3.2 Gen 2 10Gbps interface delivers rapid file transfers
  • Supports up to 4TB SATA M.2 drives for massive storage
  • C-to-C/A 2-in-1 cable with 60W PD works across laptops and phones

Tekniset tiedot

BrandORICO
ColorGray
TypeEnclosure
MaterialAluminum
External InterfaceUSB 3.1 Type-C
HDD Count SupportedSingle SSD
Number of Bay1 Bay
Maximum Capacity (per Bay)Up to 4TB

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I verify the enclosure is delivering USB 3.2 Gen 2 speeds after I connect it?

Connect the enclosure to a USB 3.2 Gen 2 port using the supplied C-to-C/A cable, then run a benchmark tool such as CrystalDiskMark; sustained sequential reads approaching the drive's rated limit confirm the 10 Gbps link is active.

What comes in the box and what must I supply myself?

The package includes the aluminium enclosure with its built-in cooling vest, a tool-free drive tray, and a 2-in-1 USB-C to USB-C / USB-A cable; you must provide your own M.2 SATA SSD up to 4 TB.

Which capacity of M.2 SATA SSD should I choose for this enclosure?

Any M.2 SATA SSD up to 4 TB is supported; pick a capacity that matches your storage budget and workload — common choices are 500 GB, 1 TB, 2 TB or 4 TB.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.