NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
OWC
128GB DDR4 3200 ECC load-reduced DIMM for servers and workstations, CL22 latency at 1.2V with 4Rx4 rank and 288-pin fit
This 128GB DDR4 3200 CL22 4Rx4 288-pin 1.2V ECC Load Reduced DIMM is built for servers, workstations and NAS systems that require registered ECC memory. It delivers 128GB per module at PC4-25600 speed with JEDEC-standard timings and voltage. The module is designed as a direct replacement for Cisco UCS part numbers UCSML128G4RW and UCSXML128G4RW.
The module is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz DDR4 platforms, allowing a straight swap without BIOS changes. The upgrade is worth it when your workload needs the higher 3200MHz data rate or the full 128GB density per slot to reduce the total module count. It will not work in systems that only accept unbuffered or standard registered ECC DIMMs.
Installation requires a motherboard with 288-pin DDR4 slots that support Load Reduced ECC memory and 4Rx4 organisation. The module has no heat spreader, so airflow in the chassis must be sufficient for bare DRAM. It cannot be mixed with unbuffered or registered ECC modules, freeing you from matching dissimilar memory types in the same channel.
| Brand | OWC |
|---|---|
| Part Number | 3L2D44R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
Yes, the 288-pin DDR4 LRDIMM form factor matches standard server DIMM slots; verify your platform accepts load-reduced memory before installing.
Align the notch with the slot key, press firmly until both retention clips click, and confirm the module sits evenly; the step often missed is not pressing both ends simultaneously.
No firmware updates are needed for the memory itself; the module is designed for the server's lifespan, though system BIOS updates may improve compatibility with 3200MHz operation.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?