OWC 16GB DDR3L 1600 PC3L-12800 CL11 2Rx4 240-pin 1.35V ECC RDIMM server RAM
- 16GB
- 240-Pin DDR3L ECC R…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
OWC
16 GB dual-channel DDR3L 1600 CL11 ECC registered RDIMM kit for servers and workstations
Capacity 16GB (2 x 8GB)
This OWC kit supplies 16 GB of DDR3L 1600 memory in a matched pair of 8 GB registered DIMMs. ECC and register buffering protect data integrity in multi-socket workstations, servers and compatible NAS or router platforms. The modules run at 1.35 V and conform to JEDEC PC3L-12800 CL11 timings. They are not compatible with standard desktop motherboards or unbuffered memory.
Each DIMM operates at the DDR3L nominal voltage of 1.35 V, reducing power draw compared with 1.5 V DDR3 equivalents. The registered design places less electrical load on the memory controller, helping sustained throughput under continuous server workloads. No heat spreaders are fitted, so airflow across the 240-pin modules is determined by the host chassis. Acoustic impact is negligible because the memory itself has no moving parts.
The kit upgrades systems currently running lower-capacity or slower-speed registered ECC DDR3 modules. Moving to 1600 MHz CL11 increases memory bandwidth for virtualization, database or file-serving tasks. The jump is worthwhile when the platform supports DDR3L 1600 registered DIMMs and the workload is limited by memory capacity or latency. It does not suit boards that require unbuffered or non-ECC memory.
| Brand | OWC |
|---|---|
| Part Number | 1R6T31R4016P |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC registered mode is active — skipping the BIOS check is the common oversight.
No routine maintenance is required; the modules have no heat spreaders or moving parts, so replacement only occurs if a DIMM fails or capacity must be increased beyond 16GB.
The DDR3L 1600 CL11 timing and 1.35V voltage ceiling define the maximum stable throughput; sustained workloads will hit this bandwidth and latency boundary before any thermal limit.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?