Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green bare circuit board with black memory chips and gold edge connectors

OWC

OWC 16GB DDR4 2666MHz CL19 1.2V 288-Pin Non-ECC UDIMM Memory Upgrade

SKU CH-CGYK-TYFYT

16 GB DDR4-2666 CL19 UDIMM for HP EliteDesk 705 G4 Tower, 800 G4 SFF and 800 G4 Tower

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCNo
  • 16GB capacity for smoother multitasking
  • 2666MHz DDR4 speed for responsive performance
  • CL19 latency with 1.2V low-voltage operation
  • 288-pin non-ECC UDIMM fits HP EliteDesk 705 G4 Tower, 800 G4 SFF and 800 G4 Tower
  • Backward compatible with 2133MHz and 2400MHz systems

16GB DDR4 2666MHz UDIMM for HP EliteDesk

This 16GB DDR4 module runs at 2666MHz with CL19 latency and 1.2V operation. It is a 288-pin non-ECC unbuffered DIMM built to JEDEC standards. The kit is validated for HP EliteDesk 705 G4 Tower, 800 G4 SFF and 800 G4 Tower systems.

Suits owners of listed EliteDesk models needing

Buyers with other desktops, workstations or NAS units should verify 288-pin DDR4 support and maximum module capacity before purchasing. Systems requiring ECC or registered memory cannot use this module. Laptops and small-form-factor boards using SO-DIMM slots are incompatible.

Installation is a standard DIMM seat

Align the notch, press firmly until the retention clips click, then power on. Common issues include not seating the module fully, mixing speeds that force the system to the lowest common speed, or exceeding the motherboard's maximum capacity per slot.

Priekšrocības

  • 16GB capacity for smoother multitasking
  • 2666MHz DDR4 speed for responsive performance
  • CL19 latency with 1.2V low-voltage operation
  • 288-pin non-ECC UDIMM fits HP EliteDesk 705 G4 Tower, 800 G4 SFF and 800 G4 Tower
  • Backward compatible with 2133MHz and 2400MHz systems

Specifikācijas

BrandOWC
Part Number2U6D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP EliteDesk 705 G4 Tower
HP EliteDesk 800 G4 SFF
HP EliteDesk 800 G4 Tower

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does my HP EliteDesk 800 G4 Tower need a free 288-pin DDR4 slot to install this 16GB module?

Yes, the module is a 288-pin DDR4 UDIMM and requires an available DDR4 DIMM slot on the motherboard.

Will this 2666MHz CL19 module downclock to run alongside my existing 2400MHz DDR4 sticks?

The module is backward compatible with 2133MHz and 2400MHz speeds and will run at the highest common speed supported by all installed modules.

How can I confirm the system recognises the full 16GB capacity after installation?

Check the total installed memory in Windows Task Manager or the BIOS/UEFI setup screen; it should show the new 16GB module added to your existing memory.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.