暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green bare circuit board with black memory chips and gold edge connectors

OWC

OWC 16GB DDR4 2666MHz CL19 1.2V 288-Pin Non-ECC UDIMM Memory Upgrade

SKU CH-CGYK-TYFYT

16 GB DDR4-2666 CL19 UDIMM for HP EliteDesk 705 G4 Tower, 800 G4 SFF and 800 G4 Tower

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCNo
  • 16GB capacity for smoother multitasking
  • 2666MHz DDR4 speed for responsive performance
  • CL19 latency with 1.2V low-voltage operation
  • 288-pin non-ECC UDIMM fits HP EliteDesk 705 G4 Tower, 800 G4 SFF and 800 G4 Tower
  • Backward compatible with 2133MHz and 2400MHz systems

16GB DDR4 2666MHz UDIMM for HP EliteDesk

This 16GB DDR4 module runs at 2666MHz with CL19 latency and 1.2V operation. It is a 288-pin non-ECC unbuffered DIMM built to JEDEC standards. The kit is validated for HP EliteDesk 705 G4 Tower, 800 G4 SFF and 800 G4 Tower systems.

Suits owners of listed EliteDesk models needing

Buyers with other desktops, workstations or NAS units should verify 288-pin DDR4 support and maximum module capacity before purchasing. Systems requiring ECC or registered memory cannot use this module. Laptops and small-form-factor boards using SO-DIMM slots are incompatible.

Installation is a standard DIMM seat

Align the notch, press firmly until the retention clips click, then power on. Common issues include not seating the module fully, mixing speeds that force the system to the lowest common speed, or exceeding the motherboard's maximum capacity per slot.

特長

  • 16GB capacity for smoother multitasking
  • 2666MHz DDR4 speed for responsive performance
  • CL19 latency with 1.2V low-voltage operation
  • 288-pin non-ECC UDIMM fits HP EliteDesk 705 G4 Tower, 800 G4 SFF and 800 G4 Tower
  • Backward compatible with 2133MHz and 2400MHz systems

仕様

BrandOWC
Part Number2U6D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP EliteDesk 705 G4 Tower
HP EliteDesk 800 G4 SFF
HP EliteDesk 800 G4 Tower

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does my HP EliteDesk 800 G4 Tower need a free 288-pin DDR4 slot to install this 16GB module?

Yes, the module is a 288-pin DDR4 UDIMM and requires an available DDR4 DIMM slot on the motherboard.

Will this 2666MHz CL19 module downclock to run alongside my existing 2400MHz DDR4 sticks?

The module is backward compatible with 2133MHz and 2400MHz speeds and will run at the highest common speed supported by all installed modules.

How can I confirm the system recognises the full 16GB capacity after installation?

Check the total installed memory in Windows Task Manager or the BIOS/UEFI setup screen; it should show the new 16GB module added to your existing memory.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。