Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green bare circuit board with black memory chips and gold edge connectors

OWC

OWC 16GB DDR4 2666MHz CL19 1.2V 288-Pin Non-ECC UDIMM Memory Upgrade

SKU CH-CGYK-TYFYT

16 GB DDR4-2666 CL19 UDIMM for HP EliteDesk 705 G4 Tower, 800 G4 SFF and 800 G4 Tower

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCNo
  • 16GB capacity for smoother multitasking
  • 2666MHz DDR4 speed for responsive performance
  • CL19 latency with 1.2V low-voltage operation
  • 288-pin non-ECC UDIMM fits HP EliteDesk 705 G4 Tower, 800 G4 SFF and 800 G4 Tower
  • Backward compatible with 2133MHz and 2400MHz systems

16GB DDR4 2666MHz UDIMM for HP EliteDesk

This 16GB DDR4 module runs at 2666MHz with CL19 latency and 1.2V operation. It is a 288-pin non-ECC unbuffered DIMM built to JEDEC standards. The kit is validated for HP EliteDesk 705 G4 Tower, 800 G4 SFF and 800 G4 Tower systems.

Suits owners of listed EliteDesk models needing

Buyers with other desktops, workstations or NAS units should verify 288-pin DDR4 support and maximum module capacity before purchasing. Systems requiring ECC or registered memory cannot use this module. Laptops and small-form-factor boards using SO-DIMM slots are incompatible.

Installation is a standard DIMM seat

Align the notch, press firmly until the retention clips click, then power on. Common issues include not seating the module fully, mixing speeds that force the system to the lowest common speed, or exceeding the motherboard's maximum capacity per slot.

Poudarki

  • 16GB capacity for smoother multitasking
  • 2666MHz DDR4 speed for responsive performance
  • CL19 latency with 1.2V low-voltage operation
  • 288-pin non-ECC UDIMM fits HP EliteDesk 705 G4 Tower, 800 G4 SFF and 800 G4 Tower
  • Backward compatible with 2133MHz and 2400MHz systems

Specifikacije

BrandOWC
Part Number2U6D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP EliteDesk 705 G4 Tower
HP EliteDesk 800 G4 SFF
HP EliteDesk 800 G4 Tower

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

Does my HP EliteDesk 800 G4 Tower need a free 288-pin DDR4 slot to install this 16GB module?

Yes, the module is a 288-pin DDR4 UDIMM and requires an available DDR4 DIMM slot on the motherboard.

Will this 2666MHz CL19 module downclock to run alongside my existing 2400MHz DDR4 sticks?

The module is backward compatible with 2133MHz and 2400MHz speeds and will run at the highest common speed supported by all installed modules.

How can I confirm the system recognises the full 16GB capacity after installation?

Check the total installed memory in Windows Task Manager or the BIOS/UEFI setup screen; it should show the new 16GB module added to your existing memory.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.