Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

OWC

OWC 32GB (4x8GB) DDR3 1333 ECC Registered RDIMM 240-pin 1.5V Dell PowerEdge R610 R710

SKU CH-NJEC-YM5HA

A 32 GB DDR3 1333 ECC registered RDIMM kit of four 8 GB modules for Dell PowerEdge R610 and R710 servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design prevents data errors in server workloads
  • 32 GB kit (4 × 8 GB) expands memory capacity for Dell PowerEdge R610 and R710
  • DDR3 1333 PC3-10600 CL9 matches factory speed and latency specs
  • 5 V 240-pin RDIMM installs directly into registered DIMM slots
  • Replaces Dell part numbers including A2984886 A2984887 A3198153 A3721483 A3858996 A4051416 A4051431 A4105734 A4188260 A4188265 A4188276

32GB DDR3 1333 ECC kit for Dell R610 R710

This 32GB kit contains four 8GB DDR3 1333 registered ECC modules built for Dell PowerEdge R610 and R710 servers. The modules run at 1.5V with CL9 latency and a 2Rx4 organisation. They are designed for workstation and server platforms that require registered memory and will not work in standard desktop computers.

Simple DIMM installation

Installation follows the standard 240-pin DIMM procedure for the R610 and R710 chassis. The registered design means these modules cannot be mixed with unbuffered memory and the server memory configuration rules for population order must be observed. No heat spreader is fitted so airflow clearance is unchanged.

Steady ECC correction under continuous server

The ECC registered architecture provides ongoing single-bit error correction and multi-bit detection during sustained operation. JEDEC-compliant DDR3 signalling at 1333 MT/s delivers consistent throughput for virtualisation, database and file-service tasks that run for extended periods without the error accumulation seen in non-ECC memory.

Priekšrocības

  • ECC registered design prevents data errors in server workloads
  • 32 GB kit (4 × 8 GB) expands memory capacity for Dell PowerEdge R610 and R710
  • DDR3 1333 PC3-10600 CL9 matches factory speed and latency specs
  • 5 V 240-pin RDIMM installs directly into registered DIMM slots
  • Replaces Dell part numbers including A2984886 A2984887 A3198153 A3721483 A3858996 A4051416 A4051431 A4105734 A4188260 A4188265 A4188276

Specifikācijas

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge R610
Dell PowerEdge R710

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How can I confirm the 32GB kit is running at 1333MHz with CL9 latency after installation?

Check the BIOS or a system tool such as CPU-Z; the memory should report DDR3 1333 (PC3-10600) at CL9 timings and 1.5V.

What comes in the box and is anything else required?

The kit includes four 8GB 240-pin DDR3 ECC registered RDIMM modules; no additional parts are needed for the Dell PowerEdge R610 or R710.

Should I choose the 2Rx4 8GB modules or a different rank for my R610?

This kit uses 2Rx4 8GB modules matching Dell part numbers such as A2984886 and SNPX3R5MC/8G, which are validated for the R610 and R710.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.