Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Four green DDR3 ECC registered DIMMs 240-pin 1.5V

OWC

OWC 32GB (4x8GB) DDR3 1333 ECC Registered RDIMM 240-pin 1.5V Dell PowerEdge R610 R710

SKU CH-NJEC-YM5HA

A 32 GB DDR3 1333 ECC registered RDIMM kit of four 8 GB modules for Dell PowerEdge R610 and R710 servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design prevents data errors in server workloads
  • 32 GB kit (4 × 8 GB) expands memory capacity for Dell PowerEdge R610 and R710
  • DDR3 1333 PC3-10600 CL9 matches factory speed and latency specs
  • 5 V 240-pin RDIMM installs directly into registered DIMM slots
  • Replaces Dell part numbers including A2984886 A2984887 A3198153 A3721483 A3858996 A4051416 A4051431 A4105734 A4188260 A4188265 A4188276

32GB DDR3 1333 ECC kit for Dell R610 R710

This 32GB kit contains four 8GB DDR3 1333 registered ECC modules built for Dell PowerEdge R610 and R710 servers. The modules run at 1.5V with CL9 latency and a 2Rx4 organisation. They are designed for workstation and server platforms that require registered memory and will not work in standard desktop computers.

Simple DIMM installation

Installation follows the standard 240-pin DIMM procedure for the R610 and R710 chassis. The registered design means these modules cannot be mixed with unbuffered memory and the server memory configuration rules for population order must be observed. No heat spreader is fitted so airflow clearance is unchanged.

Steady ECC correction under continuous server

The ECC registered architecture provides ongoing single-bit error correction and multi-bit detection during sustained operation. JEDEC-compliant DDR3 signalling at 1333 MT/s delivers consistent throughput for virtualisation, database and file-service tasks that run for extended periods without the error accumulation seen in non-ECC memory.

I korthet

  • ECC registered design prevents data errors in server workloads
  • 32 GB kit (4 × 8 GB) expands memory capacity for Dell PowerEdge R610 and R710
  • DDR3 1333 PC3-10600 CL9 matches factory speed and latency specs
  • 5 V 240-pin RDIMM installs directly into registered DIMM slots
  • Replaces Dell part numbers including A2984886 A2984887 A3198153 A3721483 A3858996 A4051416 A4051431 A4105734 A4188260 A4188265 A4188276

Specifikationer

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge R610
Dell PowerEdge R710

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How can I confirm the 32GB kit is running at 1333MHz with CL9 latency after installation?

Check the BIOS or a system tool such as CPU-Z; the memory should report DDR3 1333 (PC3-10600) at CL9 timings and 1.5V.

What comes in the box and is anything else required?

The kit includes four 8GB 240-pin DDR3 ECC registered RDIMM modules; no additional parts are needed for the Dell PowerEdge R610 or R710.

Should I choose the 2Rx4 8GB modules or a different rank for my R610?

This kit uses 2Rx4 8GB modules matching Dell part numbers such as A2984886 and SNPX3R5MC/8G, which are validated for the R610 and R710.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.