OWC 32GB DDR4 2933MHz CL21 ECC Registered RDIMM 2Rx4 memory upgrade
- 32GB
- 288-Pin DDR4 ECC RD…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
OWC
32 GB DDR4 ECC registered RDIMM running at 2933 MHz for Supermicro X11 server and workstation boards
This 32GB DDR4 module operates at 2933MHz with CL21 latency and 1.2V power. It is built for Supermicro X11 series motherboards including X11DSN-TS, X11OPi-CPU, X11QPH+, X11QPL and X11SPA-T. The registered design with ECC provides error correction for data integrity in server and workstation workloads. It is not compatible with standard desktop computers.
The 288-pin RDIMM fits server and workstation boards that support registered ECC memory. It cannot be mixed with unbuffered modules and requires a platform that accepts 2Rx4 registered DIMMs. Backward compatibility with 2133MHz, 2400MHz and 2666MHz systems allows use in older Supermicro generations. Buyers who need unbuffered memory or desktop compatibility should look elsewhere.
Operating at 1.2V, the module draws low power typical for DDR4 server memory. No heat spreader is fitted, so airflow across the DIMM slots is necessary for thermal management. The registered buffer adds minimal latency while stabilising the memory bus under load. Silent operation is assured as the module has no moving parts.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X11DSN-TS Supermicro Motherboard X11OPi-CPU Supermicro Motherboard X11QPH+ Supermicro Motherboard X11QPL Supermicro Motherboard X11SPA-T |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
CL21 at 2933MHz gives a fixed timing budget per access; sustained throughput is ultimately limited by the memory controller and rank interleaving rather than the CAS figure alone.
At 1.2V with no heat spreader, the module relies on chassis airflow; registered buffering adds slight power draw but stays within standard DDR4 thermal limits for server workloads.
This module is validated for Supermicro X11DSN-TS, X11OPi-CPU, X11QPH+, X11QPL and X11SPA-T motherboards; it will not work in standard desktop boards.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?