OWC 32GB DDR4 2933MHz CL21 ECC Registered RDIMM 2Rx4 memory upgrade
- 32GB
- 288-Pin DDR4 ECC RD…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
OWC
32 GB DDR4 ECC registered RDIMM running at 2933 MHz for Supermicro X11 server and workstation boards
This 32GB DDR4 module operates at 2933MHz with CL21 latency and 1.2V power. It is built for Supermicro X11 series motherboards including X11DSN-TS, X11OPi-CPU, X11QPH+, X11QPL and X11SPA-T. The registered design with ECC provides error correction for data integrity in server and workstation workloads. It is not compatible with standard desktop computers.
The 288-pin RDIMM fits server and workstation boards that support registered ECC memory. It cannot be mixed with unbuffered modules and requires a platform that accepts 2Rx4 registered DIMMs. Backward compatibility with 2133MHz, 2400MHz and 2666MHz systems allows use in older Supermicro generations. Buyers who need unbuffered memory or desktop compatibility should look elsewhere.
Operating at 1.2V, the module draws low power typical for DDR4 server memory. No heat spreader is fitted, so airflow across the DIMM slots is necessary for thermal management. The registered buffer adds minimal latency while stabilising the memory bus under load. Silent operation is assured as the module has no moving parts.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X11DSN-TS Supermicro Motherboard X11OPi-CPU Supermicro Motherboard X11QPH+ Supermicro Motherboard X11QPL Supermicro Motherboard X11SPA-T |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
CL21 at 2933MHz gives a fixed timing budget per access; sustained throughput is ultimately limited by the memory controller and rank interleaving rather than the CAS figure alone.
At 1.2V with no heat spreader, the module relies on chassis airflow; registered buffering adds slight power draw but stays within standard DDR4 thermal limits for server workloads.
This module is validated for Supermicro X11DSN-TS, X11OPi-CPU, X11QPH+, X11QPL and X11SPA-T motherboards; it will not work in standard desktop boards.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?