OWC 32GB DDR4 2933MHz CL21 ECC Registered RDIMM 2Rx4 memory upgrade
- 32GB
- 288-Pin DDR4 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
32 GB DDR4 ECC registered RDIMM running at 2933 MHz for Supermicro X11 server and workstation boards
This 32GB DDR4 module operates at 2933MHz with CL21 latency and 1.2V power. It is built for Supermicro X11 series motherboards including X11DSN-TS, X11OPi-CPU, X11QPH+, X11QPL and X11SPA-T. The registered design with ECC provides error correction for data integrity in server and workstation workloads. It is not compatible with standard desktop computers.
The 288-pin RDIMM fits server and workstation boards that support registered ECC memory. It cannot be mixed with unbuffered modules and requires a platform that accepts 2Rx4 registered DIMMs. Backward compatibility with 2133MHz, 2400MHz and 2666MHz systems allows use in older Supermicro generations. Buyers who need unbuffered memory or desktop compatibility should look elsewhere.
Operating at 1.2V, the module draws low power typical for DDR4 server memory. No heat spreader is fitted, so airflow across the DIMM slots is necessary for thermal management. The registered buffer adds minimal latency while stabilising the memory bus under load. Silent operation is assured as the module has no moving parts.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X11DSN-TS Supermicro Motherboard X11OPi-CPU Supermicro Motherboard X11QPH+ Supermicro Motherboard X11QPL Supermicro Motherboard X11SPA-T |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
CL21 at 2933MHz gives a fixed timing budget per access; sustained throughput is ultimately limited by the memory controller and rank interleaving rather than the CAS figure alone.
At 1.2V with no heat spreader, the module relies on chassis airflow; registered buffering adds slight power draw but stays within standard DDR4 thermal limits for server workloads.
This module is validated for Supermicro X11DSN-TS, X11OPi-CPU, X11QPH+, X11QPL and X11SPA-T motherboards; it will not work in standard desktop boards.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?