OWC 32GB (4x8GB) DDR4 2666 CL19 ECC UDIMM memory upgrade
- 32GB (4 x 8GB)
- 288-Pin DDR4 ECC UD…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
OWC
Four 16 GB DDR3L modules running at 1866 MHz CL13 and 1.35 V give 64 GB of unbuffered, non-ECC desktop memory
Capacity 64GB (4 x 16GB)
This OWC kit supplies 64 GB of DDR3L memory across four 16 GB unbuffered UDIMMs. Each module runs at 1866 MT/s with a CAS latency of CL13 at the JEDEC-standard 1.35 V. The 240-pin DIMMs are non-ECC and carry no heat spreader, making them a straightforward drop-in for compatible desktop and workstation boards.
Builders restoring or expanding older DDR3L systems that accept 16 GB density per slot will reach 64 GB without mixing modules. Systems that require ECC, registered DIMMs, or a different DDR generation cannot use this kit. Boards limited to lower per-slot densities or higher voltage-only operation should look elsewhere.
The 16 GB per module density is the single specification that determines whether a motherboard can populate all four slots to reach the full 64 GB. Verify that the target platform supports 2Rx8 16 GB DDR3L UDIMMs before purchase.
| Brand | OWC |
|---|---|
| Part Number | 1U8T32R8064S |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR3L 1866 (PC3L 14900) |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Desktops |
| LED Color | None |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Yes, every module in the kit runs at 1.35 V, matching the DDR3L specification.
The board must accept 16 GB density per slot; otherwise the full 64 GB will not be recognised.
Mixing speeds forces the system to run at the slowest installed module, so matched kits are recommended.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?