OWC 32GB (4x8GB) DDR4 2666 CL19 ECC UDIMM memory upgrade
- 32GB (4 x 8GB)
- 288-Pin DDR4 ECC UD…
OWC
Four 16 GB DDR3L modules running at 1866 MHz CL13 and 1.35 V give 64 GB of unbuffered, non-ECC desktop memory
Capacity 64GB (4 x 16GB)
This OWC kit supplies 64 GB of DDR3L memory across four 16 GB unbuffered UDIMMs. Each module runs at 1866 MT/s with a CAS latency of CL13 at the JEDEC-standard 1.35 V. The 240-pin DIMMs are non-ECC and carry no heat spreader, making them a straightforward drop-in for compatible desktop and workstation boards.
Builders restoring or expanding older DDR3L systems that accept 16 GB density per slot will reach 64 GB without mixing modules. Systems that require ECC, registered DIMMs, or a different DDR generation cannot use this kit. Boards limited to lower per-slot densities or higher voltage-only operation should look elsewhere.
The 16 GB per module density is the single specification that determines whether a motherboard can populate all four slots to reach the full 64 GB. Verify that the target platform supports 2Rx8 16 GB DDR3L UDIMMs before purchase.
| Brand | OWC |
|---|---|
| Part Number | 1U8T32R8064S |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR3L 1866 (PC3L 14900) |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Desktops |
| LED Color | None |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Yes, every module in the kit runs at 1.35 V, matching the DDR3L specification.
The board must accept 16 GB density per slot; otherwise the full 64 GB will not be recognised.
Mixing speeds forces the system to run at the slowest installed module, so matched kits are recommended.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?