OWC 32GB (4x8GB) DDR4 2666 CL19 ECC UDIMM memory upgrade
- 32GB (4 x 8GB)
- 288-Pin DDR4 ECC UD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
Four 16 GB DDR3L modules running at 1866 MHz CL13 and 1.35 V give 64 GB of unbuffered, non-ECC desktop memory
Capacity 64GB (4 x 16GB)
This OWC kit supplies 64 GB of DDR3L memory across four 16 GB unbuffered UDIMMs. Each module runs at 1866 MT/s with a CAS latency of CL13 at the JEDEC-standard 1.35 V. The 240-pin DIMMs are non-ECC and carry no heat spreader, making them a straightforward drop-in for compatible desktop and workstation boards.
Builders restoring or expanding older DDR3L systems that accept 16 GB density per slot will reach 64 GB without mixing modules. Systems that require ECC, registered DIMMs, or a different DDR generation cannot use this kit. Boards limited to lower per-slot densities or higher voltage-only operation should look elsewhere.
The 16 GB per module density is the single specification that determines whether a motherboard can populate all four slots to reach the full 64 GB. Verify that the target platform supports 2Rx8 16 GB DDR3L UDIMMs before purchase.
| Brand | OWC |
|---|---|
| Part Number | 1U8T32R8064S |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR3L 1866 (PC3L 14900) |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Desktops |
| LED Color | None |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, every module in the kit runs at 1.35 V, matching the DDR3L specification.
The board must accept 16 GB density per slot; otherwise the full 64 GB will not be recognised.
Mixing speeds forces the system to run at the slowest installed module, so matched kits are recommended.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?