OWC 64GB DDR4 3200 CL22 ECC RDIMM Supermicro H11DSi memory upgrade
- 64GB
- 288-Pin DDR4 ECC RD…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
OWC
64 GB DDR4 2933 MHz ECC registered RDIMM for Supermicro X11 server and workstation boards
This 64GB DDR4 2933MHz module is a 288-pin ECC Registered DIMM built for Supermicro X11 server and workstation boards. It operates at 1.2V with CL21 latency and a 2Rx4 rank configuration without a heat spreader. The module is validated for the X11DSN-TS, X11OPi-CPU, X11QPH+, X11QPL and X11SPA-T motherboards.
This memory fits servers, workstations and NAS systems that require registered ECC DDR4. It will not work in standard desktop computers that use unbuffered non-ECC modules. It cannot be mixed with unbuffered memory. Buyers needing consumer desktop RAM or unbuffered ECC should look at a different product type.
Confirm your board is one of the five listed Supermicro X11 models before ordering. Check the manual for maximum supported capacity per slot and the required population order for registered DIMMs. The module is backward compatible with 2133MHz, 2400MHz and 2666MHz bus speeds. Ensure the system BIOS is current for full compatibility.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X11DSN-TS Supermicro Motherboard X11OPi-CPU Supermicro Motherboard X11QPH+ Supermicro Motherboard X11QPL Supermicro Motherboard X11SPA-T |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Yes, the X11DSN-TS must accept DDR4 288-pin ECC Registered RDIMMs at 1.2V; this module is validated for that board and the listed X11 series models.
The module is backward compatible with 2133MHz, 2400MHz and 2666MHz ECC Registered DIMMs; the system will run all populated slots at the lowest common speed.
Check the BIOS memory information or run dmidecode — it should show 64GB, 2933MHz, CL21, 1.2V, ECC Registered, 2Rx4 organisation for the installed slot.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?