OWC 64GB DDR4 3200 CL22 ECC RDIMM Supermicro H11DSi memory upgrade
- 64GB
- 288-Pin DDR4 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
64 GB DDR4 2933 MHz ECC registered RDIMM for Supermicro X11 server and workstation boards
This 64GB DDR4 2933MHz module is a 288-pin ECC Registered DIMM built for Supermicro X11 server and workstation boards. It operates at 1.2V with CL21 latency and a 2Rx4 rank configuration without a heat spreader. The module is validated for the X11DSN-TS, X11OPi-CPU, X11QPH+, X11QPL and X11SPA-T motherboards.
This memory fits servers, workstations and NAS systems that require registered ECC DDR4. It will not work in standard desktop computers that use unbuffered non-ECC modules. It cannot be mixed with unbuffered memory. Buyers needing consumer desktop RAM or unbuffered ECC should look at a different product type.
Confirm your board is one of the five listed Supermicro X11 models before ordering. Check the manual for maximum supported capacity per slot and the required population order for registered DIMMs. The module is backward compatible with 2133MHz, 2400MHz and 2666MHz bus speeds. Ensure the system BIOS is current for full compatibility.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X11DSN-TS Supermicro Motherboard X11OPi-CPU Supermicro Motherboard X11QPH+ Supermicro Motherboard X11QPL Supermicro Motherboard X11SPA-T |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, the X11DSN-TS must accept DDR4 288-pin ECC Registered RDIMMs at 1.2V; this module is validated for that board and the listed X11 series models.
The module is backward compatible with 2133MHz, 2400MHz and 2666MHz ECC Registered DIMMs; the system will run all populated slots at the lowest common speed.
Check the BIOS memory information or run dmidecode — it should show 64GB, 2933MHz, CL21, 1.2V, ECC Registered, 2Rx4 organisation for the installed slot.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?