Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

OWC

OWC 8GB (4×2GB) DDR2 667 PC2-5300 CL5 200-pin 1.8V SODIMM Kit

SKU CH-FJCM-F9E79

An 8 GB DDR2 kit with four 2 GB SODIMMs running at 667 MHz, CL5 latency and 1.8 V for compatible laptops and all-in-one systems

  • Capacity8GB (4 x 2GB)
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.8V
  • ECCNo
  • 8GB total capacity across four 2GB modules
  • DDR2 667 speed with CL5 latency for responsive operation
  • 8V unbuffered non-ECC design meets JEDEC standards
  • 200-pin SODIMM form factor fits select laptops and all-in-ones
  • Dual-channel kit configuration optimises memory bandwidth

8GB DDR2 667 SODIMM Kit

This OWC kit supplies 8GB of DDR2 memory as four matched 2GB modules. Each stick is a 200-pin SO-DIMM rated for 667MHz operation at CL5 latency. The 1.8V unbuffered design follows JEDEC standards for broad laptop and all-in-one compatibility.

Suits older DDR2 platforms needing maximum capacity

Owners of laptops, all-in-one PCs or NAS units that accept 200-pin DDR2 SO-DIMMs can fill four slots with this single kit. Systems limited to lower densities, different pin counts or later DDR generations cannot use these modules.

Four-module 200-pin DDR2 667 kit

The decisive specification is the 200-pin DDR2 667 form factor combined with a 4x2GB population. Verify that the target device supports four SO-DIMM slots and the PC2-5300 speed grade before purchase.

Priekšrocības

  • 8GB total capacity across four 2GB modules
  • DDR2 667 speed with CL5 latency for responsive operation
  • 8V unbuffered non-ECC design meets JEDEC standards
  • 200-pin SODIMM form factor fits select laptops and all-in-ones
  • Dual-channel kit configuration optimises memory bandwidth

Specifikācijas

BrandOWC
Part Number5S3D22R8008S
Capacity8GB (4 x 2GB)
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
Recommend UseLaptops, All-in-One Systems, and NAS Systems

Jautājumi par šo preci

Will these 200-pin DDR2 SODIMMs fit my laptop's memory slots?

The kit uses 200-pin DDR2 SO-DIMM modules, the standard form factor for laptops and all-in-one systems that accept DDR2 667 memory.

What is the correct way to install the four 2 GB modules for dual-channel operation?

Install matched pairs in the same channel — typically slots 0 and 2 for the first pair, slots 1 and 3 for the second — so the memory controller can run in dual-channel mode.

Do these 1.8 V modules need any cleaning or component replacement over time?

No scheduled maintenance is required; the modules are solid-state with no moving parts, heat spreaders or batteries to service.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.