Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

OWC

OWC 8GB (4×2GB) DDR2 667 PC2-5300 CL5 200-pin 1.8V SODIMM Kit

SKU CH-FJCM-F9E79

An 8 GB DDR2 kit with four 2 GB SODIMMs running at 667 MHz, CL5 latency and 1.8 V for compatible laptops and all-in-one systems

  • Capacity8GB (4 x 2GB)
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.8V
  • ECCNo
  • 8GB total capacity across four 2GB modules
  • DDR2 667 speed with CL5 latency for responsive operation
  • 8V unbuffered non-ECC design meets JEDEC standards
  • 200-pin SODIMM form factor fits select laptops and all-in-ones
  • Dual-channel kit configuration optimises memory bandwidth

8GB DDR2 667 SODIMM Kit

This OWC kit supplies 8GB of DDR2 memory as four matched 2GB modules. Each stick is a 200-pin SO-DIMM rated for 667MHz operation at CL5 latency. The 1.8V unbuffered design follows JEDEC standards for broad laptop and all-in-one compatibility.

Suits older DDR2 platforms needing maximum capacity

Owners of laptops, all-in-one PCs or NAS units that accept 200-pin DDR2 SO-DIMMs can fill four slots with this single kit. Systems limited to lower densities, different pin counts or later DDR generations cannot use these modules.

Four-module 200-pin DDR2 667 kit

The decisive specification is the 200-pin DDR2 667 form factor combined with a 4x2GB population. Verify that the target device supports four SO-DIMM slots and the PC2-5300 speed grade before purchase.

Přednosti

  • 8GB total capacity across four 2GB modules
  • DDR2 667 speed with CL5 latency for responsive operation
  • 8V unbuffered non-ECC design meets JEDEC standards
  • 200-pin SODIMM form factor fits select laptops and all-in-ones
  • Dual-channel kit configuration optimises memory bandwidth

Specifikace

BrandOWC
Part Number5S3D22R8008S
Capacity8GB (4 x 2GB)
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
Recommend UseLaptops, All-in-One Systems, and NAS Systems

Otázky k tomuto produktu

Will these 200-pin DDR2 SODIMMs fit my laptop's memory slots?

The kit uses 200-pin DDR2 SO-DIMM modules, the standard form factor for laptops and all-in-one systems that accept DDR2 667 memory.

What is the correct way to install the four 2 GB modules for dual-channel operation?

Install matched pairs in the same channel — typically slots 0 and 2 for the first pair, slots 1 and 3 for the second — so the memory controller can run in dual-channel mode.

Do these 1.8 V modules need any cleaning or component replacement over time?

No scheduled maintenance is required; the modules are solid-state with no moving parts, heat spreaders or batteries to service.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.