SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00499579BTC
In stock
OWC
OWC 8GB (4×2GB) DDR2 667 PC2-5300 CL5 200-pin 1.8V SODIMM Kit
An 8 GB DDR2 kit with four 2 GB SODIMMs running at 667 MHz, CL5 latency and 1.8 V for compatible laptops and all-in-one systems
- Capacity8GB (4 x 2GB)
- Type200-Pin DDR2 SO-DIMM
- SpeedDDR2 667 (PC2 5300)
- CAS LatencyCL5
- Voltage1.8V
- ECCNo
- 8GB total capacity across four 2GB modules
- DDR2 667 speed with CL5 latency for responsive operation
- 8V unbuffered non-ECC design meets JEDEC standards
- 200-pin SODIMM form factor fits select laptops and all-in-ones
- Dual-channel kit configuration optimises memory bandwidth
8GB DDR2 667 SODIMM Kit
This OWC kit supplies 8GB of DDR2 memory as four matched 2GB modules. Each stick is a 200-pin SO-DIMM rated for 667MHz operation at CL5 latency. The 1.8V unbuffered design follows JEDEC standards for broad laptop and all-in-one compatibility.
Suits older DDR2 platforms needing maximum capacity
Owners of laptops, all-in-one PCs or NAS units that accept 200-pin DDR2 SO-DIMMs can fill four slots with this single kit. Systems limited to lower densities, different pin counts or later DDR generations cannot use these modules.
Four-module 200-pin DDR2 667 kit
The decisive specification is the 200-pin DDR2 667 form factor combined with a 4x2GB population. Verify that the target device supports four SO-DIMM slots and the PC2-5300 speed grade before purchase.
Highlights
- 8GB total capacity across four 2GB modules
- DDR2 667 speed with CL5 latency for responsive operation
- 8V unbuffered non-ECC design meets JEDEC standards
- 200-pin SODIMM form factor fits select laptops and all-in-ones
- Dual-channel kit configuration optimises memory bandwidth
Specifications
| Brand | OWC |
|---|---|
| Part Number | 5S3D22R8008S |
| Capacity | 8GB (4 x 2GB) |
| Type | 200-Pin DDR2 SO-DIMM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Voltage | 1.8V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Questions about this item
Will these 200-pin DDR2 SODIMMs fit my laptop's memory slots?
The kit uses 200-pin DDR2 SO-DIMM modules, the standard form factor for laptops and all-in-one systems that accept DDR2 667 memory.
What is the correct way to install the four 2 GB modules for dual-channel operation?
Install matched pairs in the same channel — typically slots 0 and 2 for the first pair, slots 1 and 3 for the second — so the memory controller can run in dual-channel mode.
Do these 1.8 V modules need any cleaning or component replacement over time?
No scheduled maintenance is required; the modules are solid-state with no moving parts, heat spreaders or batteries to service.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
