Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

OWC

OWC 8GB DDR3 1333 ECC Registered RDIMM 1R3D32R408GB

SKU CH-89JV-B164V

An 8 GB DDR3 1333 ECC registered RDIMM for Supermicro SuperServer 6016 and 6026 series

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes
  • ECC registered design protects data integrity in server workloads
  • 8GB DDR3 1333 CL9 module boosts Supermicro SuperServer capacity
  • Registered 2Rx4 architecture ensures stable multi-module operation
  • Direct replacement for six Supermicro part numbers simplifies procurement
  • JEDEC and RoHS compliant build meets enterprise quality standards

Server ECC RDIMM upgrade

This 8 GB DDR3 1333 PC3-10600 CL9 1.5 V registered ECC module uses a 240-pin form factor and a 2Rx4 organisation. It is built for Supermicro SuperServer 6016 and 6026 series chassis and replaces several Supermicro part numbers. The single DIMM adds error-correcting registered memory to compatible workstations and servers.

Suits validated Supermicro servers

It fits Supermicro SuperServer 6016T, 6016TT, 6016XT, 6026T and 6026TT models that require registered ECC DDR3 RDIMMs. It will not operate in platforms that accept only unbuffered non-ECC DIMMs or that use a different DDR generation. Buyers needing unbuffered memory or a different pin count should select another module.

Registered ECC DDR3 requirement

The decisive specification is that the system must support 240-pin DDR3 registered ECC RDIMMs at 1333 MT/s with 1.5 V operation. If the motherboard or BIOS requires unbuffered DIMMs or a different voltage the module will not function.

Priekšrocības

  • ECC registered design protects data integrity in server workloads
  • 8GB DDR3 1333 CL9 module boosts Supermicro SuperServer capacity
  • Registered 2Rx4 architecture ensures stable multi-module operation
  • Direct replacement for six Supermicro part numbers simplifies procurement
  • JEDEC and RoHS compliant build meets enterprise quality standards

Specifikācijas

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 6016T Series
Supermicro SuperServer 6016TT Series
Supermicro SuperServer 6016XT Series
Supermicro SuperServer 6026T Series
Supermicro SuperServer 6026TT Series

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will this 240-pin DDR3 1333 registered ECC module work in a Supermicro SuperServer 6026TT alongside existing 2Rx4 DIMMs?

Yes, it is built for the 6026TT series and carries the same 2Rx4 organisation, 1.5 V voltage and CL9 timing, so it will run in step with identical modules already installed.

How can I verify the module is recognised at the correct 1333 MT/s speed and ECC function after installation?

Enter the server BIOS or run a hardware-inventory tool such as dmidecode; both will report the DIMM as 8 GB, DDR3-1333, registered ECC, 2Rx4 at 1.5 V.

Does the package contain only the single 8 GB RDIMM or are any brackets, cables or additional sticks included?

The box holds one 8 GB 240-pin DDR3 1333 CL9 2Rx4 1.5 V ECC registered RDIMM and nothing else; no brackets, cables or extra modules are supplied.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.