OWC 8GB DDR3 1333 ECC Registered RDIMM 2Rx4 240-pin 1.5V memory upgrade
- 8GB
- 240-Pin DDR3 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
An 8 GB DDR3 1333 ECC registered RDIMM for Supermicro SuperServer 6016 and 6026 series
Capacity 8GB
This 8 GB DDR3 1333 PC3-10600 CL9 1.5 V registered ECC module uses a 240-pin form factor and a 2Rx4 organisation. It is built for Supermicro SuperServer 6016 and 6026 series chassis and replaces several Supermicro part numbers. The single DIMM adds error-correcting registered memory to compatible workstations and servers.
It fits Supermicro SuperServer 6016T, 6016TT, 6016XT, 6026T and 6026TT models that require registered ECC DDR3 RDIMMs. It will not operate in platforms that accept only unbuffered non-ECC DIMMs or that use a different DDR generation. Buyers needing unbuffered memory or a different pin count should select another module.
The decisive specification is that the system must support 240-pin DDR3 registered ECC RDIMMs at 1333 MT/s with 1.5 V operation. If the motherboard or BIOS requires unbuffered DIMMs or a different voltage the module will not function.
| Brand | OWC |
|---|---|
| Part Number | 1R3D32R408GB |
| Capacity | 8GB |
| Type | 240-Pin DDR3 ECC RDIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro SuperServer 6016T Series Supermicro SuperServer 6016TT Series Supermicro SuperServer 6016XT Series Supermicro SuperServer 6026T Series Supermicro SuperServer 6026TT Series |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, it is built for the 6026TT series and carries the same 2Rx4 organisation, 1.5 V voltage and CL9 timing, so it will run in step with identical modules already installed.
Enter the server BIOS or run a hardware-inventory tool such as dmidecode; both will report the DIMM as 8 GB, DDR3-1333, registered ECC, 2Rx4 at 1.5 V.
The box holds one 8 GB 240-pin DDR3 1333 CL9 2Rx4 1.5 V ECC registered RDIMM and nothing else; no brackets, cables or extra modules are supplied.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?