暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR3 RDIMM module with black chips on both sides and gold edge connector

OWC

OWC 8GB DDR3 1333 ECC Registered RDIMM 1R3D32R408GB

SKU CH-89JV-B164V

An 8 GB DDR3 1333 ECC registered RDIMM for Supermicro SuperServer 6016 and 6026 series

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 8GB

  • ECC registered design protects data integrity in server workloads
  • 8GB DDR3 1333 CL9 module boosts Supermicro SuperServer capacity
  • Registered 2Rx4 architecture ensures stable multi-module operation
  • Direct replacement for six Supermicro part numbers simplifies procurement
  • JEDEC and RoHS compliant build meets enterprise quality standards

Server ECC RDIMM upgrade

This 8 GB DDR3 1333 PC3-10600 CL9 1.5 V registered ECC module uses a 240-pin form factor and a 2Rx4 organisation. It is built for Supermicro SuperServer 6016 and 6026 series chassis and replaces several Supermicro part numbers. The single DIMM adds error-correcting registered memory to compatible workstations and servers.

Suits validated Supermicro servers

It fits Supermicro SuperServer 6016T, 6016TT, 6016XT, 6026T and 6026TT models that require registered ECC DDR3 RDIMMs. It will not operate in platforms that accept only unbuffered non-ECC DIMMs or that use a different DDR generation. Buyers needing unbuffered memory or a different pin count should select another module.

Registered ECC DDR3 requirement

The decisive specification is that the system must support 240-pin DDR3 registered ECC RDIMMs at 1333 MT/s with 1.5 V operation. If the motherboard or BIOS requires unbuffered DIMMs or a different voltage the module will not function.

特長

  • ECC registered design protects data integrity in server workloads
  • 8GB DDR3 1333 CL9 module boosts Supermicro SuperServer capacity
  • Registered 2Rx4 architecture ensures stable multi-module operation
  • Direct replacement for six Supermicro part numbers simplifies procurement
  • JEDEC and RoHS compliant build meets enterprise quality standards

仕様

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 6016T Series
Supermicro SuperServer 6016TT Series
Supermicro SuperServer 6016XT Series
Supermicro SuperServer 6026T Series
Supermicro SuperServer 6026TT Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 240-pin DDR3 1333 registered ECC module work in a Supermicro SuperServer 6026TT alongside existing 2Rx4 DIMMs?

Yes, it is built for the 6026TT series and carries the same 2Rx4 organisation, 1.5 V voltage and CL9 timing, so it will run in step with identical modules already installed.

How can I verify the module is recognised at the correct 1333 MT/s speed and ECC function after installation?

Enter the server BIOS or run a hardware-inventory tool such as dmidecode; both will report the DIMM as 8 GB, DDR3-1333, registered ECC, 2Rx4 at 1.5 V.

Does the package contain only the single 8 GB RDIMM or are any brackets, cables or additional sticks included?

The box holds one 8 GB 240-pin DDR3 1333 CL9 2Rx4 1.5 V ECC registered RDIMM and nothing else; no brackets, cables or extra modules are supplied.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。