暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3 ECC registered DIMM module with black chips on both sides

OWC

OWC 1R3D32R408GB 8GB DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM

SKU CH-TK6N-A873W

8GB DDR3 1333 ECC registered RDIMM for Supermicro X8DT6, X8DTE, X8DTG, X8DTH and X8DTi server motherboards

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 8GB

  • ECC registered design protects data integrity in servers
  • 8 GB DDR3 1333 module adds capacity to supported Supermicro boards
  • CL9 latency and 1.5 V operation match PC3-10600 spec
  • 240-pin 2Rx4 registered DIMM fits X8DT6, X8DTE, X8DTG, X8DTH, X8DTi series
  • Replaces six Supermicro part numbers for straightforward upgrade

Server-grade DDR3 upgrade

This 8GB DDR3 1333 registered ECC DIMM is built for Supermicro X8DT6, X8DTE, X8DTG, X8DTH and X8DTi motherboards. It delivers 1.5V operation with CL9 latency in a 240-pin RDIMM form factor. The module targets administrators extending the service life of existing dual-socket server platforms.

Replaces six Supermicro part numbers

The module substitutes for MEMDR380LCL01ER13, MEMDR380LHL01ER13, MEMDR380LHL03ER13, MEMDR380LHV01ER13, MEMDR380LSL02ER13 and MEMDR380LSL06ER13. The upgrade is worthwhile when a chassis has free RDIMM slots and the workload benefits from additional registered ECC capacity. It will not work in standard desktop boards or alongside unbuffered DIMMs.

Sustained load behaviour

Registered buffering and ECC correction maintain data integrity during continuous multi-threaded server workloads. The single-rank 2Rx4 organisation spreads access across chips for steady throughput. JEDEC and RoHS compliance ensures consistent electrical characteristics over extended operating periods.

特長

  • ECC registered design protects data integrity in servers
  • 8 GB DDR3 1333 module adds capacity to supported Supermicro boards
  • CL9 latency and 1.5 V operation match PC3-10600 spec
  • 240-pin 2Rx4 registered DIMM fits X8DT6, X8DTE, X8DTG, X8DTH, X8DTi series
  • Replaces six Supermicro part numbers for straightforward upgrade

仕様

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8DT6 Series
Supermicro Motherboard X8DTE Series
Supermicro Motherboard X8DTG Series
Supermicro Motherboard X8DTH Series
Supermicro Motherboard X8DTi Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 240-pin DDR3 RDIMM fit my Supermicro X8DT6 motherboard?

Yes, the 240-pin DDR3 1333 PC3-10600 CL9 1.5V ECC Registered RDIMM is listed as compatible with the Supermicro X8DT6 series motherboards.

Do I need to install this registered ECC module in matched pairs or specific slots?

Install the 8GB 2Rx4 RDIMM in the DIMM slots designated for registered memory by the Supermicro X8DTE series manual; do not mix it with unbuffered modules.

Does the module require any firmware updates or battery-backed components over its lifetime?

No firmware updates or battery-backed components are needed; the DRAM chips and register operate without user-serviceable parts.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。