暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR3 memory module with gold edge connectors and black chips, no heat spreader

OWC

OWC 1R3D32R408GB 8GB DDR3 1333 ECC Registered RDIMM 2Rx4 1.5V 240-pin

SKU CH-87NF-FKBKW

An 8 GB DDR3-1333 ECC registered RDIMM for Supermicro SuperServer 6036, 6046 and 7046 series

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 8GB

  • ECC protection for data integrity in servers
  • 8GB DDR3 1333 MHz registered module
  • CL9 latency at 1.5V for stable operation
  • 2Rx4 240-pin RDIMM fits Supermicro SuperServer
  • Replaces six Supermicro part numbers for easy upgrade

Server ECC RDIMM

This OWC DDR3 1333 module provides 8 GB of ECC registered memory for Supermicro SuperServer 6036T, 6046T, 7046A, 7046GT and 7046T systems. It uses a 240-pin form factor with 2Rx4 organisation and CL9 latency. The part is designed for server and workstation platforms that require registered ECC DIMMs and will not operate in standard desktop computers or alongside unbuffered modules.

Thermals and power

Operating at 1.5 V, the module follows standard DDR3 voltage levels for registered server memory. No heat spreader is fitted, so cooling depends on the server chassis airflow across the DIMM slots. Power draw remains within JEDEC limits for PC3-10600 registered parts during normal multi-user workloads.

Sustained load behaviour

Under continuous demand the registered buffer helps maintain signal integrity across fully populated channels. ECC corrects single-bit errors on the fly, preventing data corruption during long compute or virtualisation tasks. The module is validated as a direct replacement for Supermicro part numbers MEMDR380LCL01ER13, MEMDR380LHL01ER13, MEMDR380LHL03ER13, MEMDR380LHV01ER13, MEMDR380LSL02ER13 and MEMDR380LSL06ER13.

特長

  • ECC protection for data integrity in servers
  • 8GB DDR3 1333 MHz registered module
  • CL9 latency at 1.5V for stable operation
  • 2Rx4 240-pin RDIMM fits Supermicro SuperServer
  • Replaces six Supermicro part numbers for easy upgrade

仕様

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 6036T Series
Supermicro SuperServer 6046T Series
Supermicro SuperServer 7046A Series
Supermicro SuperServer 7046GT Series
Supermicro SuperServer 7046T Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install this 240-pin DDR3 RDIMM in a Supermicro SuperServer 6036T, and what step is often missed?

Power down the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until the retention clips click, then verify in BIOS that the 8 GB module is detected at 1333 MHz with ECC enabled.

What maintenance or replacement will this registered ECC module need over its service life?

No routine maintenance is required; if a correctable error count rises or the module fails, replace it with another 8 GB DDR3 1333 CL9 2Rx4 1.5 V registered DIMM to keep matched ranks across the channel.

What limit appears first when this 1.5 V DDR3 RDIMM runs sustained workloads in a 7046GT?

The 1.5 V operating voltage and CL9 latency at 1333 MHz set the thermal and timing envelope; prolonged heavy use will hit the module's rated voltage and timing limits before any other constraint.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。