Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular development board with USB-C, Qw/ST and debug connectors, reset and BOOT buttons, clear pin labels

Pimoroni

Pimoroni Pico Plus 2 RP2350 16MB flash 8MB PSRAM development board

SKU CH-7XK8-7T4EM

Development board with dual Arm Cortex-M33 cores at 150 MHz, 16 MB flash, 8 MB PSRAM, USB-C, Qw/ST, SP/CE and debug connectors

Name Pico Plus 2

  • Pico Plus 2 W
  • Pico Plus 2

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • Dual Arm Cortex-M33 cores reach 150 MHz for responsive edge processing
  • 16 MB QSPI flash supports execute-in-place for large firmware images
  • 8 MB PSRAM expands runtime memory for data-heavy applications
  • USB-C provides power, programming and data through one cable
  • Qw/ST, SP/CE and debug connectors enable solderless add-ons and SWD access

Pico Plus 2 RP2350 for embedded developers

The Pimoroni Pico Plus 2 is a microcontroller board built around the RP2350B dual Arm Cortex M33 processor running at up to 150MHz with 520KB of SRAM. It targets makers and engineers who need generous on-board storage and quick peripheral expansion without soldering.

Qw/ST and SP/CE connectors enable solderless

A Qw/ST (Qwiic/STEMMA QT) port allows plug-and-play attachment of I2C sensors and breakouts via cable. An SP/CE connector provides a similar cable-based route for SPI or serial devices. A 3-pin JST-SH debug connector supports SWD debugging, while onboard reset and BOOT buttons add convenient control.

16MB QSPI flash with XiP decides capacity fit

The board provides 16MB of QSPI flash memory supporting execute-in-place operation alongside 8MB of PSRAM. This combination determines whether the available non-volatile storage and volatile workspace meet the firmware footprint and runtime buffer requirements of a given project.

Priekšrocības

  • Dual Arm Cortex-M33 cores reach 150 MHz for responsive edge processing
  • 16 MB QSPI flash supports execute-in-place for large firmware images
  • 8 MB PSRAM expands runtime memory for data-heavy applications
  • USB-C provides power, programming and data through one cable
  • Qw/ST, SP/CE and debug connectors enable solderless add-ons and SWD access

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

Will the 16MB flash memory need replacement after repeated programming cycles?

The 16MB QSPI flash supports execute-in-place operation and is rated for typical microcontroller endurance; normal development use will not wear it out.

What limits sustained performance when the dual Cortex-M33 cores run at 150MHz continuously?

The 520KB of on-chip SRAM and thermal envelope of the RP2350B package are the first constraints under heavy continuous load.

How much heat and power does the board draw when powered via USB-C all day?

The RP2350B draws modest current at 150MHz, so the board stays cool and runs from a standard USB-C supply without extra cooling.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.