Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Brass rotary coupler with dual male G 1/4 threads, 16.5mm wide

PrimoChill

PrimoChill Dual Male G 1/4in SX Rotary Extension Coupler 16.5mm diy cooling

SKU CH-KNFZ-XMZ8F

Rotary extension coupler with dual male G 1/4in threads joins two female fittings in a custom water-cooling loop

  • TypeCPU Block

GroupWaterCoolingOption UV Pink

Skatīt vēl 9 konfigurācijas

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • Adapt female to male G 1/4in threads with dual-male rotary coupler
  • Rotary joint allows angled routing in tight loops
  • Coated brass body resists corrosion in liquid-cooling systems
  • Compact 16.5 mm width fits dense component layouts
  • Includes two installed O-rings for immediate seal readiness

Threaded rotary coupler for custom loops

The PrimoChill Dual Male G 1/4in SX Rotary Extension Coupler connects two female G 1/4in ports in a water-cooling circuit. It suits builders who need a compact, rotatable link between rigid or flexible tubing runs. The coated brass body resists corrosion while the rotary joint lets you align fittings without stressing the loop.

Dual male G 1/4in threads with 16.5 mm width

The coupler presents two male G 1/4in threads and measures 16.5 mm across the flats. Overall height with threads is 24.5 mm, dropping to 14.5 mm without them. Two O-rings come pre-installed to seal each connection. Buyers whose blocks or radiators use a different thread standard cannot use this part.

Brass construction handles typical loop temperatures

Coated brass conducts heat away from the joint and withstands normal coolant temperatures without degrading. The rotary seal adds no audible noise because it has no moving parts under flow. Power draw is zero, as the coupler is a passive mechanical component. Users should check rotary joints after case moves to ensure seals remain engaged.

Priekšrocības

  • Adapt female to male G 1/4in threads with dual-male rotary coupler
  • Rotary joint allows angled routing in tight loops
  • Coated brass body resists corrosion in liquid-cooling systems
  • Compact 16.5 mm width fits dense component layouts
  • Includes two installed O-rings for immediate seal readiness

Specifikācijas

TypeCPU Block

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How much extra length does the 16.5 mm wide coupler add to my loop?

It adds 14.5 mm of body length and 24.5 mm overall including the G 1/4 in. threads.

What does the G 1/4 in. thread standard limit in my build?

The dual male G 1/4 in. threads only mate with female G 1/4 in. ports, so every connected component must use that same thread.

Will the 18 mm width clear tight spaces between my GPU block and radiator?

The coupler measures 18 mm wide, so measure the gap in your loop; it needs at least that much clearance to install without interference.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.