Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

Qnap

Qnap TS-832PXU-RP-4G-US 2U 8-bay rackmount NAS 4GB DDR4

SKU CH-JSGR-CPFRG MPN TS-832PXU-RP-4G-US

An 8-bay 2U rackmount NAS with dual 10GbE SFP+ and dual 2.5GbE ports, redundant power supplies, and 4GB DDR4 memory expandable to 16GB

  • Port RJ-452 x 10GbE + 2 x 2.5GbE
  • HDD Interface8 x SATA (8 x Bay)
  • Form Factor8-Bay
  • ProcessorAnnapurnaLabs Alpine AL324 64-bit ARM® Cortex-A57 4-core 1.7
  • Installed Memory4GB
  • Max Memory Capacity16GB
  • Quad-core ARM processor handles heavy multi-user workloads
  • 2 x 10GbE and 2 x 2.5GbE ports deliver high-speed network throughput
  • Redundant 250W power supplies keep the system running during a PSU failure
  • 8 drive bays support up to 176TB of raw SATA storage
  • 4GB DDR4 installed, expandable to 16GB via one DIMM slot

Eight-bay rackmount NAS for multi-user environments

The Qnap TS-832PXU-RP-4G-US is a 2U rackmount network-attached storage unit with eight SATA drive bays. It runs on an AnnapurnaLabs Alpine AL324 quad-core ARM Cortex-A57 processor clocked at 1.7GHz with 4GB of installed DDR4 memory. Dual redundant 250W power supplies and connectivity through two 10GbE SFP+ ports plus two 2.5GbE RJ-45 ports are included. The diskless chassis supports up to 176TB of raw capacity.

Suited for teams needing high-throughput file

This platform fits organisations that serve many concurrent users and require redundant power for uptime assurance. The ARM-based architecture and DDR4 memory ceiling of 16GB limit virtualisation density and heavy database workloads. Buyers who need more than eight internal bays or a different processor architecture should consider a different platform.

Maximum raw capacity of 176TB across eight SATA bays

The eight-bay chassis accepts 3.5-inch and 2.5-inch SATA hard drives or SSDs up to a combined 176TB. This ceiling is the decisive figure for capacity planning; any requirement beyond it cannot be met by this unit.

Priekšrocības

  • Quad-core ARM processor handles heavy multi-user workloads
  • 2 x 10GbE and 2 x 2.5GbE ports deliver high-speed network throughput
  • Redundant 250W power supplies keep the system running during a PSU failure
  • 8 drive bays support up to 176TB of raw SATA storage
  • 4GB DDR4 installed, expandable to 16GB via one DIMM slot

Specifikācijas

BrandQNAP
ModelTS-832PXU-RP-4G-US
Port RJ-452 x 10GbE + 2 x 2.5GbE
HDD Interface8 x SATA (8 x Bay)
Form Factor8-Bay
ProcessorAnnapurnaLabs Alpine AL324 64-bit ARM® Cortex-A57 4-core 1.7GHz processor
Installed Memory4GB
Max Memory Capacity16GB
Memory Slot1 x DDR4 DIMM
Included HDD CapacityDiskless System
Max Capacity176TB
Drive Compatibility3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
LEDsHDD 1-8, Status, LAN, Storage expansion
Power250W (x2) PSU, 100 - 240V
Power ConsumptionOperating Mode, Typical 69.191 W
UsageUltra high prerformance for large number of users
TemperatureOperating Temperature 0 - 40 °C (32°F - 104°F)
Storage Temperature -20 - 70°C (-4°F - 158°F)
Humidity5-95% RH non-condensing, wet bulb: 27°C (80.6°F)
Dimensions3.5 × 18.98 × 21.02 inch
WeightWeight (Net) 24.12 lbs
Weight (Gross) 37.19 lbs
Sūtījuma svars12.70 kg
Sūtījuma izmēri711 × 559 × 254 mm

Jautājumi par šo preci

Does the TS-832PXU-RP-4G-US ship with any drives or must I supply all eight myself?

The unit is a diskless system so you must provide every drive; it accepts up to eight 3.5-inch SATA HDDs, 2.5-inch SATA HDDs or 2.5-inch SATA SSDs.

With one DDR4 DIMM slot and 4 GB already installed, should I add an 8 GB or a 12 GB module to reach the 16 GB limit?

Install a single 12 GB DDR4 DIMM to reach the 16 GB maximum; the board has only one slot so the existing 4 GB module would be replaced.

How do the two 10 GbE SFP+ ports and two 2.5 GbE RJ-45 ports behave under the typical 69.191 W operating load?

Both 10 GbE SFP+ and both 2.5 GbE RJ-45 links remain fully active at line rate while the system draws a typical 69.191 W, thanks to the quad-core 1.7 GHz AL324 processor and redundant 250 W power supplies.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.