Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Silver 2U rackmount chassis with eight front drive bays and dual redundant power supplies at the rear

Qnap

Qnap TS-832PXU-RP-4G-US 2U 8-bay rackmount NAS 4GB DDR4

SKU CH-JSGR-CPFRG MPN TS-832PXU-RP-4G-US

An 8-bay 2U rackmount NAS with dual 10GbE SFP+ and dual 2.5GbE ports, redundant power supplies, and 4GB DDR4 memory expandable to 16GB

  • Port RJ-452 x 10GbE + 2 x 2.5GbE
  • HDD Interface8 x SATA (8 x Bay)
  • Form Factor8-Bay
  • ProcessorAnnapurnaLabs Alpine AL324 64-bit ARM® Cortex-A57 4-core 1.7
  • Installed Memory4GB
  • Max Memory Capacity16GB
  • Quad-core ARM processor handles heavy multi-user workloads
  • 2 x 10GbE and 2 x 2.5GbE ports deliver high-speed network throughput
  • Redundant 250W power supplies keep the system running during a PSU failure
  • 8 drive bays support up to 176TB of raw SATA storage
  • 4GB DDR4 installed, expandable to 16GB via one DIMM slot

Eight-bay rackmount NAS for multi-user environments

The Qnap TS-832PXU-RP-4G-US is a 2U rackmount network-attached storage unit with eight SATA drive bays. It runs on an AnnapurnaLabs Alpine AL324 quad-core ARM Cortex-A57 processor clocked at 1.7GHz with 4GB of installed DDR4 memory. Dual redundant 250W power supplies and connectivity through two 10GbE SFP+ ports plus two 2.5GbE RJ-45 ports are included. The diskless chassis supports up to 176TB of raw capacity.

Suited for teams needing high-throughput file

This platform fits organisations that serve many concurrent users and require redundant power for uptime assurance. The ARM-based architecture and DDR4 memory ceiling of 16GB limit virtualisation density and heavy database workloads. Buyers who need more than eight internal bays or a different processor architecture should consider a different platform.

Maximum raw capacity of 176TB across eight SATA bays

The eight-bay chassis accepts 3.5-inch and 2.5-inch SATA hard drives or SSDs up to a combined 176TB. This ceiling is the decisive figure for capacity planning; any requirement beyond it cannot be met by this unit.

Prednosti

  • Quad-core ARM processor handles heavy multi-user workloads
  • 2 x 10GbE and 2 x 2.5GbE ports deliver high-speed network throughput
  • Redundant 250W power supplies keep the system running during a PSU failure
  • 8 drive bays support up to 176TB of raw SATA storage
  • 4GB DDR4 installed, expandable to 16GB via one DIMM slot

Špecifikácie

BrandQNAP
ModelTS-832PXU-RP-4G-US
Port RJ-452 x 10GbE + 2 x 2.5GbE
HDD Interface8 x SATA (8 x Bay)
Form Factor8-Bay
ProcessorAnnapurnaLabs Alpine AL324 64-bit ARM® Cortex-A57 4-core 1.7GHz processor
Installed Memory4GB
Max Memory Capacity16GB
Memory Slot1 x DDR4 DIMM
Included HDD CapacityDiskless System
Max Capacity176TB
Drive Compatibility3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
LEDsHDD 1-8, Status, LAN, Storage expansion
Power250W (x2) PSU, 100 - 240V
Power ConsumptionOperating Mode, Typical 69.191 W
UsageUltra high prerformance for large number of users
TemperatureOperating Temperature 0 - 40 °C (32°F - 104°F)
Storage Temperature -20 - 70°C (-4°F - 158°F)
Humidity5-95% RH non-condensing, wet bulb: 27°C (80.6°F)
Dimensions3.5 × 18.98 × 21.02 inch
WeightWeight (Net) 24.12 lbs
Weight (Gross) 37.19 lbs
Prepravná hmotnosť12.70 kg
Rozmery balenia711 × 559 × 254 mm

Otázky k tomuto produktu

Does the TS-832PXU-RP-4G-US ship with any drives or must I supply all eight myself?

The unit is a diskless system so you must provide every drive; it accepts up to eight 3.5-inch SATA HDDs, 2.5-inch SATA HDDs or 2.5-inch SATA SSDs.

With one DDR4 DIMM slot and 4 GB already installed, should I add an 8 GB or a 12 GB module to reach the 16 GB limit?

Install a single 12 GB DDR4 DIMM to reach the 16 GB maximum; the board has only one slot so the existing 4 GB module would be replaced.

How do the two 10 GbE SFP+ ports and two 2.5 GbE RJ-45 ports behave under the typical 69.191 W operating load?

Both 10 GbE SFP+ and both 2.5 GbE RJ-45 links remain fully active at line rate while the system draws a typical 69.191 W, thanks to the quad-core 1.7 GHz AL324 processor and redundant 250 W power supplies.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.