Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black aluminum SATA enclosure for 2.5 and 3.5 drives with USB 3.0 cable and power adapter

Sabrent

Sabrent USB 3.0 Tool-Free SATA Enclosure 2.5/3.5 EC-KSL3

SKU CH-4WJ0-B0HBY

Tool-free SATA enclosure turns a 2.5 or 3.5 internal drive into a USB 3.0 external drive with up to 625 MB/s transfer speeds

  • ColorBlack
  • Size2.5" & 3.5"
  • TypeDock
  • AC AdapterYes
  • MaterialAluminum
  • Internal InterfaceSATA
  • Tool-free button lets you swap drives in seconds
  • Aluminium shell and ABS tray protect the drive from shocks
  • USB 3.0 delivers up to 625 MB/s transfer speeds
  • Works with 2.5 and 3.5 SATA drives over 16TB capacity
  • Plug-and-play on Windows, Mac and Linux with no drivers

USB 3.0 SATA enclosure for 2.5 and 3.5 drives

This Sabrent enclosure turns an internal SATA hard drive or SSD into an external USB drive. It accepts both 2.5 and 3.5 inch form factors in a single dock. The tool-free design lets you swap disks by pressing a button, so it suits technicians and home users who move data between bare drives. No drivers are required on Windows, Mac or Linux.

Maximum capacity per bay exceeds 16 TB

The enclosure supports a single SATA drive of any capacity up to and beyond 16 TB, so large archival disks work without a capacity ceiling. Transfer speeds reach 625 MB/s over USB 3.0, limited by the drive itself, and the interface falls back to USB 2.0 or 1.1 when connected to older ports. An LED shows power and activity status at a glance.

Tool-free swap with included AC adapter

Installation is a matter of sliding the tray out, placing the drive on the ABS shock-absorbing tray, and pushing the tray back until it clicks. The aluminium shell aids heat dissipation and rigidity. The package supplies a USB 3.0 Type-B to Type-A cable and a 110-240 V AC adapter, so the only common issue is forgetting to connect the external power for 3.5 inch drives.

Priekšrocības

  • Tool-free button lets you swap drives in seconds
  • Aluminium shell and ABS tray protect the drive from shocks
  • USB 3.0 delivers up to 625 MB/s transfer speeds
  • Works with 2.5 and 3.5 SATA drives over 16TB capacity
  • Plug-and-play on Windows, Mac and Linux with no drivers

Specifikācijas

BrandSABRENT
ModelM.2 SSD Enclosure
ColorBlack
Size2.5" & 3.5"
TypeDock
AC AdapterYes
MaterialAluminum
Internal InterfaceSATA
External InterfaceUSB 3.0
HDD Count SupportedSingle HDD
Maximum Capacity (per Bay)More than 16TB
Sports Team1 Piece

Jautājumi par šo preci

What does the 625 MB/s figure mean when the enclosure is connected to a PC?

That is the peak throughput of the USB 3.0 link; actual transfer rates depend on the SATA drive installed and will be lower on USB 2.0 or 1.1 ports.

Which USB standard does the enclosure use and what speed does it limit me to?

It uses USB 3.0 with a 5 Gbps ceiling, and it falls back to USB 2.0 or 1.1 speeds on older ports.

What drive sizes fit inside and how is it powered?

The tray accepts one 2.5 or 3.5 SATA drive, and the unit ships with a 110-240 V AC adapter for desktop drives.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.