NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
SAMSUNG
An 8 GB DDR4 ECC registered DIMM running at 2133 MHz with CL15 latency and 1.2 V operation
This 288-pin DDR4 registered DIMM delivers 8GB of ECC-protected memory at 2133 MT/s with CL15 latency. It operates at 1.20V and uses a 1Rx4 organisation, making it suitable for multi-socket server platforms that require registered modules with error correction. The module is validated for a wide range of Supermicro X10-series motherboards.
On-board registers retime clock, command and control signals to reduce electrical load on the memory controller, allowing larger memory populations per channel. An 8-bit parity check provides single-bit error detection and correction, improving data integrity for workloads that cannot tolerate silent corruption. These features replace standard unbuffered non-ECC DIMMs in qualified server boards.
The single 8GB rank fits entry-level virtualisation hosts, database nodes or compute clusters that run within the DDR4 2133 speed envelope. Systems needing higher bandwidth per core, larger per-module densities or faster memory clocks will require modules beyond this specification.
| Brand | SAMSUNG |
|---|---|
| Series | Server Memory |
| Model | SAMSUNG:M393A1G40DB0-CPB SAMSUNG:M393A1G40EB1-CPB CRUCIAL:CT8G4RFS4213 HYNIX:HMA41GR7MFR4N-TF KINGSTON:KVR21R15S4/8 |
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Compatible System | M393A1G40DB0-CPB |
| Features | Dual in line memory module with memory -Includes registers for optimizing clock, command, and control signals -Error correction is realized by adding 8-bit parity check signal -Supports X4 / X8 organizations / up to 2 levels per DIMM and 3dpc configuration -Application: Server |
No, the DDR4 2133 module has no moving parts or user-serviceable components; once installed in a compatible 288-pin slot it operates without further maintenance.
The primary sustained-use limit is thermal — the 1.20 V DRAM and register generate heat that must be dissipated by system airflow to maintain CL15 stability.
At 1.20 V the module typically consumes a few watts, producing modest heat that standard server chassis airflow handles without additional cooling.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?