NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
SAMSUNG
An 8 GB DDR4 ECC registered DIMM running at 2133 MHz with CL15 latency and 1.2 V operation
This 288-pin DDR4 registered DIMM delivers 8GB of ECC-protected memory at 2133 MT/s with CL15 latency. It operates at 1.20V and uses a 1Rx4 organisation, making it suitable for multi-socket server platforms that require registered modules with error correction. The module is validated for a wide range of Supermicro X10-series motherboards.
On-board registers retime clock, command and control signals to reduce electrical load on the memory controller, allowing larger memory populations per channel. An 8-bit parity check provides single-bit error detection and correction, improving data integrity for workloads that cannot tolerate silent corruption. These features replace standard unbuffered non-ECC DIMMs in qualified server boards.
The single 8GB rank fits entry-level virtualisation hosts, database nodes or compute clusters that run within the DDR4 2133 speed envelope. Systems needing higher bandwidth per core, larger per-module densities or faster memory clocks will require modules beyond this specification.
| Brand | SAMSUNG |
|---|---|
| Series | Server Memory |
| Model | SAMSUNG:M393A1G40DB0-CPB SAMSUNG:M393A1G40EB1-CPB CRUCIAL:CT8G4RFS4213 HYNIX:HMA41GR7MFR4N-TF KINGSTON:KVR21R15S4/8 |
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Compatible System | M393A1G40DB0-CPB |
| Features | Dual in line memory module with memory -Includes registers for optimizing clock, command, and control signals -Error correction is realized by adding 8-bit parity check signal -Supports X4 / X8 organizations / up to 2 levels per DIMM and 3dpc configuration -Application: Server |
No, the DDR4 2133 module has no moving parts or user-serviceable components; once installed in a compatible 288-pin slot it operates without further maintenance.
The primary sustained-use limit is thermal — the 1.20 V DRAM and register generate heat that must be dissipated by system airflow to maintain CL15 stability.
At 1.20 V the module typically consumes a few watts, producing modest heat that standard server chassis airflow handles without additional cooling.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?