NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
SAMSUNG
An 8 GB DDR4 ECC registered DIMM running at 2133 MHz with CL15 latency and 1.2 V operation
This 288-pin DDR4 registered DIMM delivers 8GB of ECC-protected memory at 2133 MT/s with CL15 latency. It operates at 1.20V and uses a 1Rx4 organisation, making it suitable for multi-socket server platforms that require registered modules with error correction. The module is validated for a wide range of Supermicro X10-series motherboards.
On-board registers retime clock, command and control signals to reduce electrical load on the memory controller, allowing larger memory populations per channel. An 8-bit parity check provides single-bit error detection and correction, improving data integrity for workloads that cannot tolerate silent corruption. These features replace standard unbuffered non-ECC DIMMs in qualified server boards.
The single 8GB rank fits entry-level virtualisation hosts, database nodes or compute clusters that run within the DDR4 2133 speed envelope. Systems needing higher bandwidth per core, larger per-module densities or faster memory clocks will require modules beyond this specification.
| Brand | SAMSUNG |
|---|---|
| Series | Server Memory |
| Model | SAMSUNG:M393A1G40DB0-CPB SAMSUNG:M393A1G40EB1-CPB CRUCIAL:CT8G4RFS4213 HYNIX:HMA41GR7MFR4N-TF KINGSTON:KVR21R15S4/8 |
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Compatible System | M393A1G40DB0-CPB |
| Features | Dual in line memory module with memory -Includes registers for optimizing clock, command, and control signals -Error correction is realized by adding 8-bit parity check signal -Supports X4 / X8 organizations / up to 2 levels per DIMM and 3dpc configuration -Application: Server |
No, the DDR4 2133 module has no moving parts or user-serviceable components; once installed in a compatible 288-pin slot it operates without further maintenance.
The primary sustained-use limit is thermal — the 1.20 V DRAM and register generate heat that must be dissipated by system airflow to maintain CL15 stability.
At 1.20 V the module typically consumes a few watts, producing modest heat that standard server chassis airflow handles without additional cooling.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?