Solidigm D7-P5520 1.92TB E1.S 15mm PCIe 4.0 enterprise SSD SSDPFVKX019T1N1
- E1.S 15mm
- 1.92TB
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Solidigm
1.92 TB U.2 15 mm enterprise SSD with PCIe 4.0, 144-layer TLC 3D NAND, up to 5300 MB/s read and 1900 MB/s write, Opal security, 2,000,000-hour MTBF
Options 1.92TB, U.2 15mm, OPAL
The Solidigm D7-P5520 is a 1.92TB U.2 15mm enterprise SSD built for data-centre and server workloads. It uses 144L TLC 3D NAND and a PCI-Express 4.0 interface to deliver sequential reads up to 5300 MBps and writes up to 1900 MBps. The drive targets administrators who need consistent throughput for mixed read-write applications in a 2.5-inch bay.
Hardware-based Opal encryption secures data at rest without host software overhead. This feature simplifies compliance for regulated environments and allows instant secure erase when drives are retired. The single-pack delivery contains only the drive itself, so brackets, cables or management software licences must be sourced separately.
The 15mm Z-height fits standard 2.5-inch U.2 backplanes that accept thick drives; thinner bays will reject it. Installers must verify the backplane supplies PCIe 4.0 x4 lanes and adequate airflow for sustained write loads. A common issue is connecting the drive to a backplane wired for fewer lanes, which caps performance well below the rated speeds.
| Brand | Solidigm |
|---|---|
| Series | D7-P5520 |
| Model | D7-P5520 |
| Form Factor | U.2 15mm |
| Capacity | 1.92TB |
| Memory Components | 144L TLC 3D NAND |
| Interface | PCI-Express 4.0 |
| Max Sequential Read | Up to 5300 MBps |
| Max Sequential Write | Up to 1900 MBps |
| MTBF | 2,000,000 hours |
| Security | Opal |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Sūtījuma svars | 0.45 kg |
| Sūtījuma izmēri | 203 × 152 × 127 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The drive carries a 2,000,000 hour MTBF rating; actual write endurance depends on workload but the 1.92TB capacity provides substantial over-provisioning for mixed read-write cycles.
The 1900 MBps figure is a maximum burst rate; sustained throughput will be limited by thermal throttling and controller firmware once the 15mm U.2 form factor reaches its thermal envelope.
The U.2 15mm design fits standard 2.5-inch hot-swap bays; power draw scales with the 5300 MBps read and 1900 MBps write activity, so sustained use increases both heat and fan demand in the chassis.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?