Solidigm
Solidigm D7-PS1030 SB5PH27E016TOF1 1.6TB U.2 15mm PCIe 5.0 enterprise SSD
- U.2 15mm
- 1.6TB
1 323,99 $
0.01710825BTC
Krājumā
Solidigm
Solidigm SB5PHA7E016T001 enterprise SSD 1.6TB E3.S 7.5mm PCIe 5.0 x4
E3.S 7.5mm enterprise SSD delivering 1.6TB of 176L TLC storage with PCIe 5.0 speeds up to 14500 MBps read and 4100 MBps write
- Form FactorE3.S 7.5mm
- Capacity1.6TB
- Memory Components176L TLC 3D NAND
- InterfacePCI-Express 5.0
- Max Sequential ReadUp to 14500 MBps
- Max Sequential WriteUp to 4100 MBps
Option 1.6TB E3.S
- 1.6TB E3.S
- 1.6TB E3.S FIPS
- 1.6TB E3.S Opal
- 1.6TB U.2
- 1.6TB U.2 FIPS
- 1.6TB U.2 Opal
- 12.8TB E3.S
- 12.8TB E3.S FIPS
- 12.8TB E3.S Opal
- 12.8TB U.2
- 12.8TB U.2 FIPS
- 12.8TB U.2 Opal
Skatīt vēl 12 konfigurācijas
- 6TB capacity supports dense server storage
- PCIe 5.0 x4 interface delivers up to 14500 MBps sequential read
- 176L TLC 3D NAND enables 2350000 IOPS random read performance
- 3 DWPD endurance rating provides 8.7 PBW total writes
- 5W idle and 17W active power draw reduces thermal load
E3.S 7.5mm enterprise SSD for dense servers
The Solidigm D7-PS1030 delivers 1.6TB of storage in the E3.S 7.5mm form factor using PCI-Express 5.0. It targets data-centre operators who need high-capacity flash in a slim, hot-pluggable module. The drive employs 176L TLC 3D NAND rated for three drive writes per day.
Thermals noise and power in normal use
Idle power sits at 5W while active power reaches 17W under load. The operating temperature range spans 0°C to 77°C without a specified acoustic rating. Shock tolerance is rated at 1,000 G for 0.5 msec and vibration tolerance at 2.17 GRMS across 5 to 700 Hz during operation.
No bundled accessories or software included
The single-pack shipment contains only the drive itself; no mounting hardware, cables or management utilities are supplied. Buyers who need brackets, thermal pads or proprietary firmware tools must source them separately. The drive carries a 2,500,000-hour MTBF and 8.7 PBW endurance rating.
Priekšrocības
- 6TB capacity supports dense server storage
- PCIe 5.0 x4 interface delivers up to 14500 MBps sequential read
- 176L TLC 3D NAND enables 2350000 IOPS random read performance
- 3 DWPD endurance rating provides 8.7 PBW total writes
- 5W idle and 17W active power draw reduces thermal load
Specifikācijas
| Brand | Solidigm |
|---|---|
| Model | D7-PS1030 |
| Part Number | SB5PHA7E016T001 |
| Form Factor | E3.S 7.5mm |
| Capacity | 1.6TB |
| Memory Components | 176L TLC 3D NAND |
| Interface | PCI-Express 5.0 |
| Max Sequential Read | Up to 14500 MBps |
| Max Sequential Write | Up to 4100 MBps |
| 4KB Random Read | 2350000 IOPS (4K Blocks) |
| 4KB Random Write | 350000 IOPS (4K Blocks) |
| Endurance | 3 DWPD / 8.7 PBW |
| MTBF | 2,500,000 hours |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 17W |
| Operating Temperature | 0°C to 77°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 110g +/- 10g |
| Sūtījuma svars | 0.17 kg |
| Sūtījuma izmēri | 140 × 110 × 17 mm |
Citas šī modeļa versijas
Vēl 5 šajā sērijā
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Solidigm
Solidigm D7-PS1030 SB5PHA7E016TOF1 1.6TB E3.S 7.5mm PCIe 5.0 enterprise SSD
- E3.S 7.5mm
- 1.6TB
1 554,99 $
0.02009317BTC
Krājumā
Solidigm
Solidigm D7-PS1030 1.6TB E3.S 7.5mm PCIe 5.0 enterprise SSD SB5PHA7E016TOP1
- E3.S 7.5mm
- 1.6TB
1 790,99 $
0.02314269BTC
Krājumā
Solidigm
Solidigm SB5PH27E016T001 enterprise SSD 1.6TB U.2 15mm PCIe 5.0
- U.2 15mm
- 1.6TB
1 930,99 $
0.02495174BTC
KrājumāJautājumi par šo preci
How do I install the E3.S 7.5mm drive and what step is often missed?
Slide the drive into the E3.S bay until the connector seats fully, then secure it with the single retention screw; the step most often missed is tightening that screw, which keeps the PCIe 5.0 x4 link stable under vibration.
What maintenance or replacement will the 176L TLC NAND need later?
The drive is rated for 3 DWPD and 8.7 PBW total writes; once that endurance budget is consumed the NAND can no longer guarantee data retention and the drive must be replaced.
What limit appears first during sustained heavy writes?
The sequential write ceiling of 4100 MBps is reached before the 17 W active power envelope or the 77 °C temperature limit, so sustained write throughput tops out at that figure.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
