NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
SPECO TECHNOLOGIES
Provides 12 VDC at 1000 mA through a 2-pin connector for low-voltage devices
The SPECO TECHNOLOGIES PSW5 delivers a regulated 12 VDC output at 1000mA for low-power devices. Its 2-pin PCI-Express connector fits compatible equipment directly. The black enclosure measures 3 x 1 x 5 inches and weighs 0.09071847400000002 kg. UL Listed certification confirms it meets recognised safety standards.
No internal fan means silent operation in normal use. The unit draws only the current required by the connected load up to its 1 Amp rating. Minimal heat is produced, so no active airflow management is needed around the supply. Power consumption scales with the attached device rather than running at a fixed high level.
The compact footprint frees space inside tight enclosures or on crowded benches. A standard 12 V input source is all that is required to operate the supply. The 2-pin connector eliminates the need for adapter cables when the target device matches the pinout. Builders seeking higher amperage or different voltage rails will need a separate solution.
| Brand | Speco Technologies |
|---|---|
| Model | PSW5 |
| Part Number | PSW5 |
| Color | Black |
| Type | 2-Pin |
| PCI-Express Connector | 2-Pin |
| Dimensions | 3 x 1 x 5 inches |
| Weight | 0.09071847400000002 kg |
| Input Voltage | 12 volts |
Plug the 2-Pin PCI-Express connector into the matching 12VDC input on your equipment; the step people get wrong is reversing polarity, so verify the positive and negative markings before applying power.
The PSW5 has no user-serviceable parts; if the 1A output drifts or the unit fails, replace the entire power supply rather than attempting internal repair.
The 1000mA (1 Amp) current rating is the first limit; sustained draw at or above this level will trigger the supply's protection and shut down output.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?