NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
SPECO TECHNOLOGIES
Provides 12 VDC at 1000 mA through a 2-pin connector for low-voltage devices
The SPECO TECHNOLOGIES PSW5 delivers a regulated 12 VDC output at 1000mA for low-power devices. Its 2-pin PCI-Express connector fits compatible equipment directly. The black enclosure measures 3 x 1 x 5 inches and weighs 0.09071847400000002 kg. UL Listed certification confirms it meets recognised safety standards.
No internal fan means silent operation in normal use. The unit draws only the current required by the connected load up to its 1 Amp rating. Minimal heat is produced, so no active airflow management is needed around the supply. Power consumption scales with the attached device rather than running at a fixed high level.
The compact footprint frees space inside tight enclosures or on crowded benches. A standard 12 V input source is all that is required to operate the supply. The 2-pin connector eliminates the need for adapter cables when the target device matches the pinout. Builders seeking higher amperage or different voltage rails will need a separate solution.
| Brand | Speco Technologies |
|---|---|
| Model | PSW5 |
| Part Number | PSW5 |
| Color | Black |
| Type | 2-Pin |
| PCI-Express Connector | 2-Pin |
| Dimensions | 3 x 1 x 5 inches |
| Weight | 0.09071847400000002 kg |
| Input Voltage | 12 volts |
Plug the 2-Pin PCI-Express connector into the matching 12VDC input on your equipment; the step people get wrong is reversing polarity, so verify the positive and negative markings before applying power.
The PSW5 has no user-serviceable parts; if the 1A output drifts or the unit fails, replace the entire power supply rather than attempting internal repair.
The 1000mA (1 Amp) current rating is the first limit; sustained draw at or above this level will trigger the supply's protection and shut down output.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?