NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
SPECO TECHNOLOGIES
Provides 12 VDC at 1000 mA through a 2-pin connector for low-voltage devices
The SPECO TECHNOLOGIES PSW5 delivers a regulated 12 VDC output at 1000mA for low-power devices. Its 2-pin PCI-Express connector fits compatible equipment directly. The black enclosure measures 3 x 1 x 5 inches and weighs 0.09071847400000002 kg. UL Listed certification confirms it meets recognised safety standards.
No internal fan means silent operation in normal use. The unit draws only the current required by the connected load up to its 1 Amp rating. Minimal heat is produced, so no active airflow management is needed around the supply. Power consumption scales with the attached device rather than running at a fixed high level.
The compact footprint frees space inside tight enclosures or on crowded benches. A standard 12 V input source is all that is required to operate the supply. The 2-pin connector eliminates the need for adapter cables when the target device matches the pinout. Builders seeking higher amperage or different voltage rails will need a separate solution.
| Brand | Speco Technologies |
|---|---|
| Model | PSW5 |
| Part Number | PSW5 |
| Color | Black |
| Type | 2-Pin |
| PCI-Express Connector | 2-Pin |
| Dimensions | 3 x 1 x 5 inches |
| Weight | 0.09071847400000002 kg |
| Input Voltage | 12 volts |
Plug the 2-Pin PCI-Express connector into the matching 12VDC input on your equipment; the step people get wrong is reversing polarity, so verify the positive and negative markings before applying power.
The PSW5 has no user-serviceable parts; if the 1A output drifts or the unit fails, replace the entire power supply rather than attempting internal repair.
The 1000mA (1 Amp) current rating is the first limit; sustained draw at or above this level will trigger the supply's protection and shut down output.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?