EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
SPECO TECHNOLOGIES
Provides 12 VDC at 1000 mA through a 2-pin connector for low-voltage devices
The SPECO TECHNOLOGIES PSW5 delivers a regulated 12 VDC output at 1000mA for low-power devices. Its 2-pin PCI-Express connector fits compatible equipment directly. The black enclosure measures 3 x 1 x 5 inches and weighs 0.09071847400000002 kg. UL Listed certification confirms it meets recognised safety standards.
No internal fan means silent operation in normal use. The unit draws only the current required by the connected load up to its 1 Amp rating. Minimal heat is produced, so no active airflow management is needed around the supply. Power consumption scales with the attached device rather than running at a fixed high level.
The compact footprint frees space inside tight enclosures or on crowded benches. A standard 12 V input source is all that is required to operate the supply. The 2-pin connector eliminates the need for adapter cables when the target device matches the pinout. Builders seeking higher amperage or different voltage rails will need a separate solution.
| Brand | Speco Technologies |
|---|---|
| Model | PSW5 |
| Part Number | PSW5 |
| Color | Black |
| Type | 2-Pin |
| PCI-Express Connector | 2-Pin |
| Dimensions | 3 x 1 x 5 inches |
| Weight | 0.09071847400000002 kg |
| Input Voltage | 12 volts |
Plug the 2-Pin PCI-Express connector into the matching 12VDC input on your equipment; the step people get wrong is reversing polarity, so verify the positive and negative markings before applying power.
The PSW5 has no user-serviceable parts; if the 1A output drifts or the unit fails, replace the entire power supply rather than attempting internal repair.
The 1000mA (1 Amp) current rating is the first limit; sustained draw at or above this level will trigger the supply's protection and shut down output.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?