Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular ATX server motherboard with twelve DDR5 memory slots and multiple PCIe slots

Supermicro

Supermicro MBD-H13SSL-N-O server motherboard SP5 EPYC 9004 9005 12 DDR5 ATX

SKU CH-T8D0-3EETF MPN MBD-H13SSL-N-O

Server motherboard with Socket SP5 for AMD EPYC 9004/9005, twelve DDR5 DIMM slots, three PCIe 5.0 x16 and two PCIe 5.0 x8 slots, eight SATA3 ports.

  • CPU Socket TypeSocket SP5
  • CPU TypeAMD EPYC 9004 Series

Model MBD-H13SSL-N-O

  • Supports AMD EPYC 9004 and 9005 processors via Socket SP5
  • 12 DDR5 DIMM slots enable up to 3 TB memory capacity
  • Three PCIe 5.0 x16 and two PCIe 5.0 x8 slots for high-speed expansion
  • Two M.2 slots accept 2280 and 22110 form factors over PCIe 4.0 x4
  • Eight SATA3 ports and six USB 3.0 ports provide extensive storage and peripheral connectivity

AMD EPYC SP5 server board

The Supermicro MBD-H13SSL-N-O is a Socket SP5 motherboard built for AMD EPYC 9004 and 9005 series processors. It uses a system-on-chip design and fits a standard ATX footprint. Twelve DDR5 DIMM slots support up to 3 TB of 3DS ECC registered memory in a one-DIMM-per-channel layout.

Suited for dense compute nodes

This board suits builders who need high core counts and large memory capacity in a single-socket ATX form factor. Three PCIe 5.0 x16 slots and two PCIe 5.0 x8 slots provide ample expansion for accelerators or networking. Buyers who require dual-socket scaling or a proprietary rackmount form factor should look at a different platform.

Standard ATX installation

The ATX mounting pattern aligns with common chassis screw holes and the 24-pin plus 8-pin power connectors follow established pinouts. Six 4-pin PWM fan headers with tachometer monitoring simplify cooling setup. Installers must verify that the board revision is 2.x before fitting a 9005 series CPU, otherwise the processor will not be recognised.

Priekšrocības

  • Supports AMD EPYC 9004 and 9005 processors via Socket SP5
  • 12 DDR5 DIMM slots enable up to 3 TB memory capacity
  • Three PCIe 5.0 x16 and two PCIe 5.0 x8 slots for high-speed expansion
  • Two M.2 slots accept 2280 and 22110 form factors over PCIe 4.0 x4
  • Eight SATA3 ports and six USB 3.0 ports provide extensive storage and peripheral connectivity

Specifikācijas

CPU Socket TypeSocket SP5
CPU TypeAMD EPYC 9004 Series
Sūtījuma svars1.88 kg
Sūtījuma izmēri457 × 373 × 91 mm

Citas šī modeļa versijas

Vēl 3 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What AMD EPYC 9004 or 9005 series processor is required for the SP5 socket on this board?

Any AMD EPYC 9004 or 9005 series processor with an SP5 socket fits this motherboard; 9005 series support needs board revision 2.x.

Will the six PWM 4-pin fan headers control older 3-pin fans that I want to reuse?

Yes, 3-pin fans plug into the 4-pin headers and run at full speed; PWM control is not available on those fans.

How can I confirm the twelve DDR5 DIMM slots are all recognised after installation?

Check the BIOS memory information page — it should show twelve populated slots and the total capacity up to 3 TB.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.