Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular ATX server motherboard with twelve DDR5 memory slots and multiple PCIe slots

Supermicro

Supermicro MBD-H13SSL-N-O server motherboard SP5 EPYC 9004 9005 12 DDR5 ATX

SKU CH-T8D0-3EETF MPN MBD-H13SSL-N-O

Server motherboard with Socket SP5 for AMD EPYC 9004/9005, twelve DDR5 DIMM slots, three PCIe 5.0 x16 and two PCIe 5.0 x8 slots, eight SATA3 ports.

  • CPU Socket TypeSocket SP5
  • CPU TypeAMD EPYC 9004 Series

Model MBD-H13SSL-N-O

  • Supports AMD EPYC 9004 and 9005 processors via Socket SP5
  • 12 DDR5 DIMM slots enable up to 3 TB memory capacity
  • Three PCIe 5.0 x16 and two PCIe 5.0 x8 slots for high-speed expansion
  • Two M.2 slots accept 2280 and 22110 form factors over PCIe 4.0 x4
  • Eight SATA3 ports and six USB 3.0 ports provide extensive storage and peripheral connectivity

AMD EPYC SP5 server board

The Supermicro MBD-H13SSL-N-O is a Socket SP5 motherboard built for AMD EPYC 9004 and 9005 series processors. It uses a system-on-chip design and fits a standard ATX footprint. Twelve DDR5 DIMM slots support up to 3 TB of 3DS ECC registered memory in a one-DIMM-per-channel layout.

Suited for dense compute nodes

This board suits builders who need high core counts and large memory capacity in a single-socket ATX form factor. Three PCIe 5.0 x16 slots and two PCIe 5.0 x8 slots provide ample expansion for accelerators or networking. Buyers who require dual-socket scaling or a proprietary rackmount form factor should look at a different platform.

Standard ATX installation

The ATX mounting pattern aligns with common chassis screw holes and the 24-pin plus 8-pin power connectors follow established pinouts. Six 4-pin PWM fan headers with tachometer monitoring simplify cooling setup. Installers must verify that the board revision is 2.x before fitting a 9005 series CPU, otherwise the processor will not be recognised.

Přednosti

  • Supports AMD EPYC 9004 and 9005 processors via Socket SP5
  • 12 DDR5 DIMM slots enable up to 3 TB memory capacity
  • Three PCIe 5.0 x16 and two PCIe 5.0 x8 slots for high-speed expansion
  • Two M.2 slots accept 2280 and 22110 form factors over PCIe 4.0 x4
  • Eight SATA3 ports and six USB 3.0 ports provide extensive storage and peripheral connectivity

Specifikace

CPU Socket TypeSocket SP5
CPU TypeAMD EPYC 9004 Series
Přepravní hmotnost1.88 kg
Rozměry balení457 × 373 × 91 mm

Další verze tohoto modelu

Dalších 3 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What AMD EPYC 9004 or 9005 series processor is required for the SP5 socket on this board?

Any AMD EPYC 9004 or 9005 series processor with an SP5 socket fits this motherboard; 9005 series support needs board revision 2.x.

Will the six PWM 4-pin fan headers control older 3-pin fans that I want to reuse?

Yes, 3-pin fans plug into the 4-pin headers and run at full speed; PWM control is not available on those fans.

How can I confirm the twelve DDR5 DIMM slots are all recognised after installation?

Check the BIOS memory information page — it should show twelve populated slots and the total capacity up to 3 TB.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.