Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small black 85mm square graphics card fan with 15mm thickness and short cable

SXDOOL

SXDOOL GA92S2H 85mm 12V 0.35A vga cooling

SKU CH-5PTJ-VT7ZS MPN GA92S2H

85 mm replacement fan for Galaxy HOF 970, 1060, 1070 and 1080 Ti limited edition cards, 12 V 0.35 A, 15 mm thick with 7 cm or 14 cm cable

  • Direct replacement for Galaxy HOF limited edition cards
  • 85 mm diameter matches original mounting pattern
  • 15 mm thick profile fits standard VGA slots
  • 12 V 0.35 A power draw runs from GPU header
  • 14 cm default cable length eases routing

Compatible Galaxy HOF models

This replacement fan fits Galaxy HOF graphics cards including GTX1060, GTX1070, GTX970 and GTX1080 Ti limited edition models. It is intended for owners of those specific cards who need a direct cooling replacement.

85mm diameter and mounting holes

The critical specification is the 85mm diameter combined with the hole spacing shown in the product image. The 15mm thickness and 12V 0.35A rating must also match the original fan for proper fit and electrical compatibility.

Short or long cable version

The fan ships with a 14cm cable by default, while a 7cm short version exists. Buyers must verify their card's fan model GA92S2H and physical appearance before ordering, as cable length and connector orientation can prevent installation.

Priekšrocības

  • Direct replacement for Galaxy HOF limited edition cards
  • 85 mm diameter matches original mounting pattern
  • 15 mm thick profile fits standard VGA slots
  • 12 V 0.35 A power draw runs from GPU header
  • 14 cm default cable length eases routing

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

What does the 0.35 A current draw mean once the fan is installed on a Galaxy HOF card?

The fan draws 0.35 A at 12 V, so it adds roughly 4 W to the graphics card's power budget and runs from the standard GPU fan header without needing an extra connector.

Which interface standard does the 12 V 0.35 A fan use and what does it limit?

It uses a standard 3-pin or 4-pin PWM header on the GPU, capping speed control to the voltage or PWM signal the board provides.

What physical dimensions and hole pattern must match for the GA92S2H to mount correctly?

The frame is 85 mm in diameter and 15 mm thick; the exact screw-hole spacing is shown in the product photo, so compare that pattern with your card before fitting.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.