אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר

SXDOOL

SXDOOL GA92S2H 85mm 12V 0.35A vga cooling

SKU CH-5PTJ-VT7ZS MPN GA92S2H

85 mm replacement fan for Galaxy HOF 970, 1060, 1070 and 1080 Ti limited edition cards, 12 V 0.35 A, 15 mm thick with 7 cm or 14 cm cable

  • Direct replacement for Galaxy HOF limited edition cards
  • 85 mm diameter matches original mounting pattern
  • 15 mm thick profile fits standard VGA slots
  • 12 V 0.35 A power draw runs from GPU header
  • 14 cm default cable length eases routing

Compatible Galaxy HOF models

This replacement fan fits Galaxy HOF graphics cards including GTX1060, GTX1070, GTX970 and GTX1080 Ti limited edition models. It is intended for owners of those specific cards who need a direct cooling replacement.

85mm diameter and mounting holes

The critical specification is the 85mm diameter combined with the hole spacing shown in the product image. The 15mm thickness and 12V 0.35A rating must also match the original fan for proper fit and electrical compatibility.

Short or long cable version

The fan ships with a 14cm cable by default, while a 7cm short version exists. Buyers must verify their card's fan model GA92S2H and physical appearance before ordering, as cable length and connector orientation can prevent installation.

נקודות עיקריות

  • Direct replacement for Galaxy HOF limited edition cards
  • 85 mm diameter matches original mounting pattern
  • 15 mm thick profile fits standard VGA slots
  • 12 V 0.35 A power draw runs from GPU header
  • 14 cm default cable length eases routing

מפרט טכני

טרם פורסם מפרט טכני לפריט זה.

שאלות על הפריט הזה

What does the 0.35 A current draw mean once the fan is installed on a Galaxy HOF card?

The fan draws 0.35 A at 12 V, so it adds roughly 4 W to the graphics card's power budget and runs from the standard GPU fan header without needing an extra connector.

Which interface standard does the 12 V 0.35 A fan use and what does it limit?

It uses a standard 3-pin or 4-pin PWM header on the GPU, capping speed control to the voltage or PWM signal the board provides.

What physical dimensions and hole pattern must match for the GA92S2H to mount correctly?

The frame is 85 mm in diameter and 15 mm thick; the exact screw-hole spacing is shown in the product photo, so compare that pattern with your card before fitting.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.